资源列表

« 1 2 ... .52 .53 .54 .55 .56 957.58 .59 .60 .61 .62 ... 4311 »

[VHDL编程CCDOUT

说明:CCD信号由于其特殊性,一般不能有信号源产生,本程序采用VHDL语言,以ISE为开发平台,产生了模拟CCD信号的数字信号,只需经DA转换便能实现-CCD signal because of its uniqueness, not generally produce a signal source, the procedures used VHDL, ISE as a development platform, have CCD sign
<刘小军> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程dds

说明:dds算法的fpga实现 altera 根据不同设置,输出不同频率的信号源-dds algorithm to achieve fpga set according to different altera, the output of the signal source at different frequencies
<liulei> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程cossin

说明:数字信号源,输出不同频率,相位的正余弦信号,-Digital signal source, the output of different frequency, phase is the cosine signal,
<liulei> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程verilog

说明:里面包含了大量VHDL的源码程序,赶快下载来分析分析吧 希望对大家有用哈-Which contains a large number of VHDL source program to analyze the analysis quickly download it hope to be useful Kazakhstan...
<smallwei> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程nixietube

说明:FPGA入门教程-----数码管驱动,适合新入门-FPGA Tutorial----- LED driver for the new entry
<zhangmingfu> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程jiafa

说明:实现AD采样进来的5路信号相加、比较,判决,输出控制码 实现数字自动增益控制-AD sample the incoming signal sum, comparison, judgment, and output control codes to implement digital AGC
<谭振伟> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程mulbinarytree

说明:16位二叉树乘法器(阵列乘法器),VHDL实现-16-bit binary tree multiplier (array multiplier), VHDL realization
<jiajunxian> 在 2025-03-19 上传 | 大小:1.04mb | 下载:1

[VHDL编程CD1_OV5620_DISPALY

说明:基于FPGA的CMOS图像传感器(OV5620)显示图像-FPGA-based CMOS image sensor (OV5620) image
<dixia> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程SPCQF

说明:8路抢答器的设计,程序采用verilogHDL语言编写-8-way Responder design, the program uses language verilogHDL
<丛梦龙> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程_4to2

说明:基于verilog编写的4线2线编码器,在板子上直接运行,相应引脚自己配置-Verilog prepared based 2-wire 4-wire encoders, running directly on the board, the corresponding pin their allocation
<maxruan> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程sdr_sdram_epm570

说明:CPLD芯片EPM570对SDRAM的读写操作,通过串口显示。-SDRAM write and read test based on CPLD chip-- EPM570.
<黄成林> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0

[VHDL编程cic_cz

说明: 在altera平台用verilog硬件描述语言实现cic插值滤波,在modelsim软件中仿真通过,包含完整的工程代码,可以直接下载到FPGA中运行-In the Altera platform using Verilog hardware descr iption language CIC interpolation filter, through the simulation in Modelsim software, inc
<汪少锋> 在 2025-03-19 上传 | 大小:1.04mb | 下载:0
« 1 2 ... .52 .53 .54 .55 .56 957.58 .59 .60 .61 .62 ... 4311 »

源码中国 www.ymcn.org