资源列表

« 1 2 ... .29 .30 .31 .32 .33 3334.35 .36 .37 .38 .39 ... 4311 »

[VHDL编程jtag_uart_0

说明:jatag在nios环境下的接口代码,可在ISE或quartus下完成调试-Nios jatag environment in the interface code, can be accomplished under the ISE or Quartus debugging
<> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程PCR

说明:本程序是在传输流传输过程中对节目时钟字段进行检测与修改,采用Verilog HDL 语言进行编程。-This procedure is in the transport stream during transmission of program the clock to carry out field testing and modification, using Verilog HDL language programming.
<yagebu> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程create_new_component

说明:sopc 中,新建component。详细介绍了如何根据HDL代码生成黑盒的过程。-SOPC, the new component. Described in detail how the HDL code generation black-box process.
<wangxue> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程1

说明:根据交通灯控制器的功能与要求,将其总体电路分为分频器、信号控制器两个模块。-According to the traffic light controller functions and the requirements of the overall circuit is divided into its divider, the signal controller two modules.
<li> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程SimpleBehavioralSRAMModel

说明:HC164用来驱动数码管以及LED指示灯,动态扫描数码管的是利用视觉暂留的特性进行显 示景物引起人的视觉印象,在景物消失后还能在视网膜上保持0。1秒的时间叫做视觉暂 留。可以将数据刷新速率可以为10Hz(0.1s),同时我们需要对四位数据进行扫描,因此 数据刷新速率最低应该为10Hz×4。最高可以为50MHz(HC164可以工作在50-175MHz)。 根据实际情况我们可以定为 762.939453125 = 50MHz
<食肉鸟> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程lcd

说明:利用FPGA驱动LCD显示中文字符的VHDL程序-Use of FPGA-driven LCD display Chinese characters of the VHDL program
<朱传雨> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程baweichufaqi

说明:介绍了利用VHDL实现八位除法,采用层次化设计,该除法器采用了VHDL的混合输入方式,将除法器分成若干个子模块后,对各个子模块分别设计,各自生成功能模块完成整体设计,实现了任意八位无符号数的除法。 -Introduced the use of VHDL to achieve eight division, the use of hierarchical design, the divider using VHDL mixed-inp
<佘斌> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程dallas_one-wire

说明:dallas one wire的VHDL实现方式,比较常用的.-dallas one wire to achieve the VHDL approach commonly used.
<> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程ahbapb

说明:AMBA2.0标准的AHB2APb桥,代码通过验证-AMBA2.0 standard AHB2APb Bridge, through the verification code
<LIANG> 在 2025-02-01 上传 | 大小:4kb | 下载:2

[VHDL编程dianziqingVHDL

说明:简易电子琴 基本代码,不完全,希望有人能补充 -Simple flower basic code, not completely, I hope someone can add
<宋滨宏> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程CPLD_Config

说明:用Altera CPLD做为控制器从Flash上读取image文件对Altera FPGA编程-Altera CPLD used as a controller to read image from the Flash on the Altera FPGA programming
<jwq> 在 2025-02-01 上传 | 大小:4kb | 下载:0

[VHDL编程vhdl

说明:
<hehe520> 在 2025-02-01 上传 | 大小:4kb | 下载:0
« 1 2 ... .29 .30 .31 .32 .33 3334.35 .36 .37 .38 .39 ... 4311 »

源码中国 www.ymcn.org