资源列表

« 1 2 ... .29 .30 .31 .32 .33 634.35 .36 .37 .38 .39 ... 4311 »

[VHDL编程vga_test

说明:vga接口的测试程序,对vga接口程序的控制测试-vga interface, test procedures, test control interface program vga
<fangzhendong> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程lcd_lib_4bit

说明:lcd file for pic16f8-lcd file for pic16f877
<Ngoc Anh> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程guozhe_chuankou

说明:串口接收程序,verilpog写的串口接收程序-receiver receiver chuankou
<deng> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程cpld

说明:CPLD 语言VHDL,实现对电机位置信号检测和输出驱动-CPLD language VHDL, to realize the motor position signal detection and output drive
<杭舟> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程trafficlight

说明:基于VHDL的交通灯控制设计,功能: 1 主干道绿灯亮时,支干道红灯亮;支干道绿灯亮时,主干道红灯亮。二者交替允许通行,主干道每次放行35s,支干道每次放行25s。每次由绿灯变为红灯的过程中,通过点亮黄灯作为过渡,黄灯的时间为5s。 2 能实现正常的倒计时显示功能,即通过7段数码管对交通灯剩余时间进行倒计时显示。 3 能实现总体清零功能,计数器由初始状态开始计数,对应状态的显示灯点亮。 4 能实现特殊状态的功能显示,进入
<李名山> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程FIFO_GRAY

说明:
<elsa> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程processor

说明:processor design in vhdl
<vinoth> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程LCD

说明:DE2板上的LCD显示器驱动程序和相应的测试程序,verilog语言写的。-DE2 LCD display driver board and the corresponding test procedures, verilog language to write.
<陶陶> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程PCI

说明:在底层代码中,常常需要读写PCI配置空间的数据,这个小程序将pci寄存器读出来,然后显示在屏幕上。-In the underlying code, often need to read and write data from PCI configuration space, this little program will read out the pci registers, and then displayed on the scr
<王非> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程idt71v416s10

说明:code for ram in verilog hdl
<Oleg> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程prat5

说明:This code allows an application with the state machine in VHDL and his conception
<mapo> 在 2025-03-03 上传 | 大小:2kb | 下载:0

[VHDL编程lightctr

说明:the control code for traffic light
<liudm0> 在 2025-03-03 上传 | 大小:2kb | 下载:0
« 1 2 ... .29 .30 .31 .32 .33 634.35 .36 .37 .38 .39 ... 4311 »

源码中国 www.ymcn.org