本软件可通过微机并口向用户提供多达12路的标准TTL脉冲信号，同时可进行5路的标准TTL脉冲信号的波形显示。 软件的使用方法极为简单。输出信号时，只要选中或取消引脚号，就能在相应的引脚得到相应的脉冲信号（统一为选中为高电平，取消为低电平），“清零”按钮为对应该组的所有信号清零。 输入信号的波形显示，按“开始”按钮为开始进行显示，“停止”为暂停。 在设置面板中，“数据读入时间间隔”为读入时间的设定。“并行打印端口设置”为显示微机中存在的可用打印端口，并可以设定本软件当前要使用的端口（如只有一个可用端口，就为缺省端口，如有多个可用端口软件自动选择最后一个可用端口为当前使用端口）。 -This software is available through computer parallel port to provide users with up to 12 standard TTL pulse signal path, while the standard 5-way can be TTL pulse signal waveform display. The software is extremely simple to use. The output signal, as long as the select or cancel the pin number, the corresponding pin will be able to get a corresponding pulse signal (uniform selected as high as the abolition of the low), "Clear" button for the right should be group cleared all signals. Input signal waveform display, click "Start" button to begin to display, "stop" for pause. In the settings panel, "data read time interval" to read into the time settings. "Parallel printer port settings" to show the existence of available computer in the printing port, and can set the software to use the current port (if there is only one available port on the default port, if more available ports software to automatically select the last one available port for the current use of port).