文件名称:demeXSADC
- 所属分类：
- 单片机(51,AVR,MSP430等)
- 资源属性：
- [C/C++] [源码]
- 上传时间：
- 2012-11-26
- 文件大小：
- 239kb
- 下载次数：
- 0次
- 提 供 者：
- 邱**
- 相关连接：
- 无
- 下载说明：
- 别用迅雷下载，失败请重下，重下不扣分！
介绍说明－－下载内容均来自于网络，请自行研究使用
龙丘MC9S12XS128 多功能开发板
Designed by Chiu Sir
E-mail:chiusir@163.com
软件版本:V1.1
最后更新:2009年2月16日
相关信息参考下列地址：
博客： http://longqiu.21ic.org
淘宝店：http://shop36265907.taobao.com
------------------------------------
Code Warrior 4.7
Target : MC9S12XS128
Crystal: 16.000Mhz
busclock: 8.000MHz
pllclock:16.000MHz
本程序主要包括以下功能：
1.设置锁相环和总线频率；
2.IO口使用；
3.共四路ATD使用及显示方法。
LED计数，根据灯亮可以读取系统循环了多少次-LongQiu comprehensive development platform for intelligent vehicles V3.0
Designed by LongQiu
E-mail: chiusir@163.com
Software version: V1.2
Last Update: April 21, 2009
Information refer to the following address:
Blog: http://longqiu.21ic.org
Taobao: http://shop36265907.taobao.com
------------------------------------
Code Warrior 5.0
Target: MC9S12XS128
Crystal: 16.000Mhz
============================================
This procedure includes the following features:
1. Set the system clock in the under xxMHZ bus clock
2. Testing Long Hill minimum system development board overclocking performance:
If the LED flashes on the normal work of the chip
Otherwise, that chip is not working correctly, please check the system design
3. Qinghua University can also test the overclocking board minimum system performance,
LED count, according to light cycle system can read how many times
Designed by Chiu Sir
E-mail:chiusir@163.com
软件版本:V1.1
最后更新:2009年2月16日
相关信息参考下列地址：
博客： http://longqiu.21ic.org
淘宝店：http://shop36265907.taobao.com
------------------------------------
Code Warrior 4.7
Target : MC9S12XS128
Crystal: 16.000Mhz
busclock: 8.000MHz
pllclock:16.000MHz
本程序主要包括以下功能：
1.设置锁相环和总线频率；
2.IO口使用；
3.共四路ATD使用及显示方法。
LED计数，根据灯亮可以读取系统循环了多少次-LongQiu comprehensive development platform for intelligent vehicles V3.0
Designed by LongQiu
E-mail: chiusir@163.com
Software version: V1.2
Last Update: April 21, 2009
Information refer to the following address:
Blog: http://longqiu.21ic.org
Taobao: http://shop36265907.taobao.com
------------------------------------
Code Warrior 5.0
Target: MC9S12XS128
Crystal: 16.000Mhz
============================================
This procedure includes the following features:
1. Set the system clock in the under xxMHZ bus clock
2. Testing Long Hill minimum system development board overclocking performance:
If the LED flashes on the normal work of the chip
Otherwise, that chip is not working correctly, please check the system design
3. Qinghua University can also test the overclocking board minimum system performance,
LED count, according to light cycle system can read how many times
相关搜索： MC9S12XS128
(系统自动生成,下载前可以参看下载内容)
下载文件列表
demeXSADC
.........\bin
.........\...\Full_Chip_Simulation.map
.........\...\TBDML.abs
.........\...\TBDML.abs.glo
.........\...\TBDML.abs.s19
.........\...\TBDML.map
.........\cmd
.........\...\Full_Chip_Simulation_Postload.cmd
.........\...\Full_Chip_Simulation_Preload.cmd
.........\...\Full_Chip_Simulation_Reset.cmd
.........\...\Full_Chip_Simulation_SetCPU.cmd
.........\...\Full_Chip_Simulation_Startup.cmd
.........\...\TBDML_Erase_unsecure_$$UNSECURE_TYPE$$.cmd
.........\...\TBDML_Erase_unsecure_hcs12xe.cmd
.........\...\TBDML_Postload.cmd
.........\...\TBDML_Preload.cmd
.........\...\TBDML_Reset.cmd
.........\...\TBDML_Startup.cmd
.........\...\TBDML_Vppoff.cmd
.........\...\TBDML_Vppon.cmd
.........\C_Layout.hwl
.........\Default.mem
.........\demeXSADC.mcp
.........\demeXSADC_Data
.........\..............\CWSettingsWindows.stg
.........\..............\Full_Chip_Simulation
.........\..............\....................\TargetDataWindows.tdt
.........\..............\TBDML
.........\..............\.....\ObjectCode
.........\..............\.....\..........\datapage.c.o
.........\..............\.....\..........\demoXSADC.c.o
.........\..............\.....\..........\LQprintp.c.o
.........\..............\.....\..........\MC9S12XS128.c.o
.........\..............\.....\..........\Start12.c.o
.........\..............\.....\TargetDataWindows.tdt
.........\Full_Chip_Simulation.ini
.........\prm
.........\...\burner.bbl
.........\...\Full_Chip_Simulation_linker.prm
.........\...\Project.prm
.........\...\TBDML_linker.prm
.........\readme.txt
.........\Sources
.........\.......\datapage.c
.........\.......\demoXSADC.c
.........\.......\LQATDmain.c
.........\.......\LQprintp.c
.........\.......\LQprintp.h
.........\.......\main.c
.........\.......\Start12.c
.........\TBDML.ini
.........\tips.txt
.........\bin
.........\...\Full_Chip_Simulation.map
.........\...\TBDML.abs
.........\...\TBDML.abs.glo
.........\...\TBDML.abs.s19
.........\...\TBDML.map
.........\cmd
.........\...\Full_Chip_Simulation_Postload.cmd
.........\...\Full_Chip_Simulation_Preload.cmd
.........\...\Full_Chip_Simulation_Reset.cmd
.........\...\Full_Chip_Simulation_SetCPU.cmd
.........\...\Full_Chip_Simulation_Startup.cmd
.........\...\TBDML_Erase_unsecure_$$UNSECURE_TYPE$$.cmd
.........\...\TBDML_Erase_unsecure_hcs12xe.cmd
.........\...\TBDML_Postload.cmd
.........\...\TBDML_Preload.cmd
.........\...\TBDML_Reset.cmd
.........\...\TBDML_Startup.cmd
.........\...\TBDML_Vppoff.cmd
.........\...\TBDML_Vppon.cmd
.........\C_Layout.hwl
.........\Default.mem
.........\demeXSADC.mcp
.........\demeXSADC_Data
.........\..............\CWSettingsWindows.stg
.........\..............\Full_Chip_Simulation
.........\..............\....................\TargetDataWindows.tdt
.........\..............\TBDML
.........\..............\.....\ObjectCode
.........\..............\.....\..........\datapage.c.o
.........\..............\.....\..........\demoXSADC.c.o
.........\..............\.....\..........\LQprintp.c.o
.........\..............\.....\..........\MC9S12XS128.c.o
.........\..............\.....\..........\Start12.c.o
.........\..............\.....\TargetDataWindows.tdt
.........\Full_Chip_Simulation.ini
.........\prm
.........\...\burner.bbl
.........\...\Full_Chip_Simulation_linker.prm
.........\...\Project.prm
.........\...\TBDML_linker.prm
.........\readme.txt
.........\Sources
.........\.......\datapage.c
.........\.......\demoXSADC.c
.........\.......\LQATDmain.c
.........\.......\LQprintp.c
.........\.......\LQprintp.h
.........\.......\main.c
.........\.......\Start12.c
.........\TBDML.ini
.........\tips.txt