TC35i新版西门子工业GSM模块是一个支持中文短信息的工业级GSM模块,工作在EGSM900和GSM1800双频段,电源范围为直流3.3～4.8V ,电流消耗——休眠状态为3.5mA，空闲状态为25mA，发射状态为300mA(平均)，2.5A峰值；可传输语音和数据信号, 功耗在EGSM900(4类)和GSM1800(1类)分别为2W和1W ,通过接口连接器和天线连接器分别连接SIM卡读卡器和天线。SIM电压为3V/1.8V，TC35i的数据接口(CMOS电平)通过AT命令可双向传输指令和数据,可选波特率为300b/s～115kb/s , 自动波特率为1.2kb/s～115kb/s。它支持Text和PDU格式的SMS(Short Message Service,短消息),可通过AT命令或关断信号实现重启和故障恢复-The new industrial GSM Siemens TC35i module is a short message in support of the Chinese industrial grade GSM module, working in EGSM900 and GSM1800 dual band, power range of DC 3.3 ~ 4.8V, current consumption- dormant for 3.5mA, idle to 25mA, launch status 300mA (average), 2.5A peak　can transmit voice and data signals, power consumption in the EGSM900 (4) and GSM1800 (1 category) were 2W and 1W, through the interface connector and antenna connector connected SIM card reader and antenna. SIM voltage 3V/1.8V, TC35i data interface (CMOS level) through the AT command can be bi-directional command and data transmission, an optional baud rate is 300b/s ~ 115kb/s, auto-baud rate is 1.2kb/s ~ 115kb/s. It supports Text and PDU format of SMS (Short Message Service, Short Message Service), available through AT commands, or turn-off signal to achieve the resumption and Recovery