资源列表

« 1 2 ... .11 .12 .13 .14 .15 1016.17 .18 .19 .20 .21 ... 4311 »

[VHDL编程noisII_led

说明:这是基于FPGA的SOPC嵌入式的CD光盘的一个实例。-this is a example for at SOPC of FPGA.It is a good example
<steef> 在 2025-02-08 上传 | 大小:943kb | 下载:0

[VHDL编程S9_LCD1602

说明:cyclone II EP2C8 对1206液晶屏的基本操作-cyclone II EP2C8 on the basic operation of the LCD screen 1206
<studystep0> 在 2025-02-08 上传 | 大小:942kb | 下载:0

[VHDL编程FPGA-CPLD

说明:FPGA/CPLD设计经验分享,数字电路设计中的经典问题分析,很实用。-FPGA/CPLD design experience sharing, digital circuit design of the classic analysis, it is practical.
<蒋西> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程example1

说明:8051. soft develop 8051, know about 8051
<LeDuy> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程Digital-clock-circuit-diagram

说明:数字钟的电路图.1.显示时、分、秒。2. 可以24小时制或12小时制。3. 具有校时功能,可以对小时和分单独校时,对分校时的时候,停止分向小时进位。校时时钟源可以手动输入或借用电路中的时钟。4. 具有正点报时功能,正点前10秒开始,蜂鸣器1秒响1秒停地响5次。-Digital clock circuit diagram
<kjx> 在 2025-02-08 上传 | 大小:943kb | 下载:0

[VHDL编程123

说明:在FPGA中用状态机实现对数码管的控制很好的了解一下状态机-State machine in the FPGA with the control of the digital control
<王得鑫> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程Buttons-control-the-output-waveform

说明:在FPGA开发板上,利用verilog语言,实现按键控制输出波形的参数值,并且在数码管上显示相应参数。-On the FPGA development board, use the verilog language to achieve the function that use the button to control parameter values of the output waveform and display them
<> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程VGA

说明:针对FPGA,可以实现VGA显示。可以显示数字,字符,汉子。可以调节屏幕颜色和大小。-failed to translate
<郭艳亮> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程fpga

说明:新手报到,贡献一些FPGA设计的电子书,希望对大家有用。-Novice report, contribute some FPGA design books, I hope useful.
<kevin> 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程CPU

说明:CPU调试,集合了指令译码器、存储器等,组成了一个简易的CPU-CPU debugging, a collection of instruction decoder, memory, etc., form a simple CPU
<痴心> 在 2025-02-08 上传 | 大小:943kb | 下载:0

[VHDL编程UART_DMA

说明:UART_DMA的方法是使用nios实现UART方式实现DMA传输,在硬件平台上通过验证实现-UART_DMA way is to use uart dma transfer nios implemented in the hardware platform validated by
<黄信 > 在 2025-02-08 上传 | 大小:944kb | 下载:0

[VHDL编程ex1_config_as_jtag

说明:FPGA器件有三类配置下载方式:主动配置方式(AS) 、被动配置方式(PS)和最常用的基于JTAG的配置方式。 本代码对AS和JTAG的配置方式进行了研究。-FPGA devices have three types of configuration download: active configuration (AS), passive configuration (PS) and the most common way of JTA
<焦峰凯> 在 2025-02-08 上传 | 大小:944kb | 下载:0
« 1 2 ... .11 .12 .13 .14 .15 1016.17 .18 .19 .20 .21 ... 4311 »

源码中国 www.ymcn.org