资源列表

« 1 2 ... .39 .40 .41 .42 .43 2044.45 .46 .47 .48 .49 ... 2139 »

[DSP编程timed_led_blink

说明:这个示例配置CPU Timer0 以500毫秒为周期以及触发GPIO3、4-This example configures CPU Timer0 for a 500 msec period, and toggles the GPIO34
<刘虎> 在 2024-09-29 上传 | 大小:5120 | 下载:0

[DSP编程i2c_eeprom

说明:dsp28027,通过i2c在eeprom写入1~4个字节,再从中读出。-This program will write 1-14 words to EEPROM and read them back.
<刘虎> 在 2024-09-29 上传 | 大小:8192 | 下载:0

[DSP编程cpu_timer

说明:这个示例配置DSP28027CPU Timer0 1 & 2和增量,每计数一次,定时器产生一个中断。-This example configures CPU Timer0, 1, & 2 and increments,a counter each time the timer asserts an interrupt.
<刘虎> 在 2024-09-29 上传 | 大小:53248 | 下载:0

[DSP编程adc_temp_sensor

说明:配置dsp28027的PLL为x12/2模式。这个是其具体的程序实现。- This example sets up the PLL in x12/2 mode.
<刘虎> 在 2024-09-29 上传 | 大小:6144 | 下载:0

[DSP编程ecap_capture_pwm

说明:在ccs5.5环境下,捕获pwm,可选择上升沿与下降沿,目的:获取一定时间-In the ccs5.5 environment, capture PWM, you can choose the rising edge and the falling edge, the purpose: to obtain a certain time
<欧阳元清> 在 2024-09-29 上传 | 大小:66560 | 下载:0

[DSP编程4clock-and-watchdog-introduction

说明:该内容详细介绍了看门狗及时钟的功能,以及寄存器的分配,并附有例程-The content and details of the watchdog function of the clock, as well as register allocation, along with routine
<> 在 2024-09-29 上传 | 大小:901120 | 下载:0

[DSP编程ipiq

说明:基于CCS的DSP编程,IP-IQ谐波与无功电流检测-Based on CCS DSP programming, IP-IQ harmonic and reactive current detection
<刘建强> 在 2024-09-29 上传 | 大小:932864 | 下载:0

[DSP编程VPX6_DSP4_3_app_kh_v1_00

说明:基于SYS、bios的SRIO测试doum,主要言语测试SRIO的设置、连接、通过等。-Based on SYS, bios SRIO test doum, main speech test SRIO set, connect, pass and so on.
<杨海学> 在 2024-09-29 上传 | 大小:12651520 | 下载:0

[DSP编程DAC7614

说明:DAC7614 驱动 源代码 DAC7614 驱动 源代码-DAC7614 driver
<> 在 2024-09-29 上传 | 大小:2048 | 下载:0

[DSP编程Example_2833x_FFT

说明:基于DSP开发板(TMS320F28335)的FFT例程,测试可用,管脚定义在程序内部。-Example of FFT.
<高书亮> 在 2024-09-29 上传 | 大小:107520 | 下载:0

[DSP编程W5500

说明:W5500.c程序,主要是W5500的底层驱动程序,spi通讯,里面程序打包好的,可直接用。-W5500.c procedures, mainly W5500 the underlying driver, spi communication, can be used directly.
<张望> 在 2024-09-29 上传 | 大小:3072 | 下载:0

[DSP编程W5500

说明:W5500.h程序,主要是W5500的底层驱动程序的头文件,配合。c文件一起使用,可直接用。-W5500.h procedures, mainly W5500 the underlying driver of the first document, with. C file used together, can be used directly.
<张望> 在 2024-09-29 上传 | 大小:4096 | 下载:1
« 1 2 ... .39 .40 .41 .42 .43 2044.45 .46 .47 .48 .49 ... 2139 »

源码中国 www.ymcn.org