资源列表

[单片机(51,AVR,MSP430等)lineonyejing

说明:是一个在液晶上画斜线的C51的程序,希望对大家有帮助!-is a picture of the LCD slash the C51 process, we want to help!
<陈超> 在 2025-03-16 上传 | 大小:4kb | 下载:0

[单片机(51,AVR,MSP430等)51DSl302

说明:P串行实时时钟芯片DSl302程序设计中的问题与对策-P serial real-time clock chip DSl302 program design problems and countermeasures
<陈超> 在 2025-03-16 上传 | 大小:8kb | 下载:0

[单片机(51,AVR,MSP430等)111201

说明:单片机的坐标128x64液晶KS0108驱动程序(C51编写)-MCU coordinates KS0108 128x64 LCD Driver (C51 preparation)
<陈超> 在 2025-03-16 上传 | 大小:7kb | 下载:0

[单片机(51,AVR,MSP430等)01010

说明:由8051设计的单片机数字钟,包括具体流程和相干程序-design from the 8051 microcontroller digital clock, including specific processes and procedures Coherent
<陈超> 在 2025-03-16 上传 | 大小:5kb | 下载:0

[单片机(51,AVR,MSP430等)reshuiqijianshi

说明:
<刘萌> 在 2025-03-16 上传 | 大小:3kb | 下载:0

[单片机(51,AVR,MSP430等)signalgenereter

说明:这是一个基于89C51单片机的简易信号发生器的源程序,程序代码由C语言编写-This is an 89C51 microcontroller based on the simplicity of the source signal generator, code written in C
<刘萌> 在 2025-03-16 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)moshuZHUANHUAN

说明:这是用AT89C2051单片机实现模数转换的源程序,程序由汇编语言编写-This is achieved using AT89C2051 mode conversion of the source, procedures prepared by the assembly language
<刘萌> 在 2025-03-16 上传 | 大小:3kb | 下载:0

[单片机(51,AVR,MSP430等)hongwaiyaokongdiannaoyinyuanqiehuan

说明:CDLEA.hex CDLEA_Main.c CDLEA.hex为已编译的红外遥控音源切换器的单片机程序 CDLEA_Main.c为源代码 CDLEB.hex CDLEB_Main.c CDLEB.hex为已编译的加强版的红外遥控音源切换器的单片机程序   有红外遥控PC功能,PC软件可使用Grider3.2(SAA3010T电视遥控器)   Grider3.2可到http://cdle.yeah.
<刘萌> 在 2025-03-16 上传 | 大小:375kb | 下载:0

[单片机(51,AVR,MSP430等)maier-WL

说明:一反馈报警器的完整原程序,用于负载量变化的检测与报警.-a feedback report of the original integrity of procedures for loading change detection and alarm.
<痴迷者> 在 2025-03-16 上传 | 大小:1kb | 下载:0

[单片机(51,AVR,MSP430等)C51serial

说明:24C01 24C02的C51源程序|串口通信C51源程序, 未整理,但编译后的HEX代码可在WS803上直接运行。-24C01 24C02 source of C51 | Serial Communication C51 source, not collate However, the compiled code of HEX at WS803 directly run.
<张华> 在 2025-03-16 上传 | 大小:2kb | 下载:0

[单片机(51,AVR,MSP430等)Time-Temperature-1-2.4-color-display

说明:通过读取ds1302信息直接显示到液晶屏上。有备用电池,断电后时间仍可以正常运行。通过串口调试软件更新时间。更新方式如下在发送栏填写时间信息,格式如下2009071210102005 表示2009年7月12日 10点10分20秒 星期五,然后通过串口发送,硬件连接方式和串口通信相同。注意中间不能有空格-By reading ds1302 information display directly to the LCD screen. Ha
<郭建斌> 在 2025-03-16 上传 | 大小:117kb | 下载:0

[单片机(51,AVR,MSP430等)ST7920-12864-DISPLAY

说明:通过显示字符、数字、汉字和图片测试液晶基本功能-By displaying characters, numbers, characters and images to test the basic functions of the LCD
<郭建斌> 在 2025-03-16 上传 | 大小:27kb | 下载:0

源码中国 www.ymcn.org