资源列表
[单片机(51,AVR,MSP430等)] CALLER
说明:CALLER.rar包括电路图和源程序用51单片机实现。本无线呼叫器主机设有3个按键即服务、删除、查看。具体工作流程如下:当顾客按下按键(顾客需求服务按键)后,数据通过无线方式送给主机。主机的RX3310A—1收到信号后传送给PT2272L4解码,由于单片机不停地对PT2272L4进行地址扫描,PT2272L4将解码后的数据存于某一地址当单片机扫描到这一具有数据的地址后。就取出其数据,将数据处理后送到数码管显示。在数据处理这一阶段单片机<zhoujiang> 在 2024-09-27 上传 | 大小:8192 | 下载:0
[单片机(51,AVR,MSP430等)] LED_DISPLAY
说明:LED_DISPLAY.rar包括电路图和源程序,用51单片机实现。LED点阵为16*128,可用于显示8个16*16点阵的汉字或图形等,可级联。-LED_DISPLAY.rar including schematics and source code, the MCU 51. LED dot matrix 16* 128, can be used to display 8 16* 16 lattice, such as Chinese<zhoujiang> 在 2024-09-27 上传 | 大小:10240 | 下载:0
[单片机(51,AVR,MSP430等)] TRAFFIC_LAMP
说明:TRAFFIC_LAMP.rar包括电路图和源程序,用51单片机实现。能控制东西、南北方向的红、黄、绿灯,东西、南北方向的通行时间(即绿灯的时间)可以修改。-TRAFFIC_LAMP.rar including schematics and source code, using 51 single-chip realization. Able to control things, the North-South direction of<zhoujiang> 在 2024-09-27 上传 | 大小:6144 | 下载:0
[uCOS开发] MicroCOS_II_src_code
说明:uc/os-ii随书源代码,first time, thanks-uc/os-ii with the book source code, first time, thanks<yangxin> 在 2024-09-27 上传 | 大小:3102720 | 下载:0
[单片机(51,AVR,MSP430等)] flash_WR
说明:单片机读写NAND flash程序,里面包括读,写,擦除-Single-chip NAND flash read and write procedures, which include reading, writing and erasing<wang> 在 2024-09-27 上传 | 大小:1024 | 下载:0
[单片机(51,AVR,MSP430等)] 7
说明:单片机源码,实现按键时间计时兵得出平均时间。富电路图和源码-Single-chip source, time to achieve key time soldiers come to the average amount of time. Fu schematics and source code<luoyouhao> 在 2024-09-27 上传 | 大小:59392 | 下载:0
[微处理器(ARM/PowerPC等)] s3c2410adc.tar
说明:基于s3c2410芯片的数据采集系统 目标环境:S3C2410芯片、经裁剪后的linux2.6内核、sqlite数据库、cgi库 项目描述:节点端采集数据,并通过网络把数据传给服务器端。 服务器接收数据,并把数据保存在数据库中。 服务器可以通过CGI程序远程控制节点发送数据的时间间隔。 该系统还有配套的数据库本地查询系统和基于CGI的网络查询系统。-S3C2410 chip-based data acquisitio<hh> 在 2024-09-27 上传 | 大小:7460864 | 下载:0
[微处理器(ARM/PowerPC等)] samsung
说明:摄象机控制协议,三星的摄象机控制协议。摄象机控制协议,三星的摄象机控制协议-Camera control protocol, Samsung s camera control protocol. Camera control protocol, Samsung s camera control protocol<zrj2222> 在 2024-09-27 上传 | 大小:13312 | 下载:0
[VxWorks] S3C2410BSPdesign
说明:VxWorks在S3C2410上的BSP设计-VxWorks in the BSP design S3C2410<黄炜> 在 2024-09-27 上传 | 大小:114688 | 下载:0
[单片机(51,AVR,MSP430等)] msp430f149SimulateUart
说明:从网上下载例程不能用,经过修改BitTime就可以用了,绝对可用的源码而且没有误码,拿人格担保在MSP430F149上可用,P1.3发送-Routines downloaded from the Internet can not be used, modified BitTime can be used, the absolute source code available and there is no error, take per<shihaimou> 在 2024-09-27 上传 | 大小:2048 | 下载:0
[单片机(51,AVR,MSP430等)] msp430f149monichuanku
说明:这是在TI网站上下的例程,绝对可用, P2.2,p2.3,在示波器上调试,调BitTime可以调节脉冲宽度,就可以调节波特率了,模拟串口发送一个字节需要发10位,起始位+8位有效数据+停止位,二真实串口不用发起始和停止位,因为缓冲区已经将他们加上了-This is a site from top to bottom in TI routines, absolutely available, P2.2, p2.3, in oscill<shihaimou> 在 2024-09-27 上传 | 大小:2048 | 下载:0