资源列表
[微处理器(ARM/PowerPC等)] Stm32UART
说明:STM32R的uart驱动,方便移植,包括头文件与源文件,很好用-the UART driver of stm32 , easy to use,with head file and source file,very good!<nizhijun> 在 2025-02-24 上传 | 大小:11kb | 下载:0
[微处理器(ARM/PowerPC等)] Stm32_INT
说明:STM32R的INT 中断驱动,方便移植,包括头文件与源文件,很好用-the INT driver of stm32 , easy to use,with head file and source file,very good!<nizhijun> 在 2025-02-24 上传 | 大小:6kb | 下载:0
[嵌入式Linux] au
说明:A simple PID fan controller with nice LCD display: It uses the input two precise DHT22 based temperature sensors. The MCU is an Arduino Uno, which is powered using a 12V power source.-A simple PID fan controller with nic<RAJAMANICKAM> 在 2025-02-24 上传 | 大小:768kb | 下载:0
[微处理器(ARM/PowerPC等)] program
说明:监测终端程序 Monitor the terminal program -Monitor the terminal program Monitor the terminal program Monitor the terminal program<李智> 在 2025-02-24 上传 | 大小:18.63mb | 下载:0
[单片机(51,AVR,MSP430等)] pro
说明:模拟电路 单片机 流水灯本流水灯实际上就是一个带有八个发光二极管的单片机最小应用系统,即为由发光二极管、晶振、复位、电源等电路和必要的软件组成的单个单片机。从原理图中可以看出,如果要让接在P1.0口的LED1亮起来,那么只要把P1.0口的电平变为低电平就可以了 相反, 如果要接在P1.0口的LED1熄灭,就要把P1.0口的电平变为高电平 同理,接在P1.1~P1.7口的其他7个LED的点亮和熄灭的方法同LED1。因此,要实现流水灯功能,<杨景焜> 在 2025-02-24 上传 | 大小:3kb | 下载:0
[其他嵌入式/单片机内容] Temperature-alarm
说明:基于嵌入式和protues的温度报警器系统-Temperature alarm system based on embedded and proteus<林> 在 2025-02-24 上传 | 大小:1.69mb | 下载:0
[VHDL编程] spi_master
说明:使用verilog语言实现FPGA下的SPI的主机模式,波特率为晶振时钟的五分之一,发送稳定-Using verilog language to achieve the SPI under the host mode, the baud rate is one-fifth of the crystal clock, send stable<张仑仑> 在 2025-02-24 上传 | 大小:109kb | 下载:0
[其他嵌入式/单片机内容] the-six-axis-sensor-STM32F407
说明:本文件是基于STM32F407的六轴传感器的全部文件。-This document is based on all files of the six-axis sensor STM32F407.<王书廷> 在 2025-02-24 上传 | 大小:6.54mb | 下载:0