资源列表

« 1 2 ... .97 .98 .99 .00 .01 27702.03 .04 .05 .06 .07 ... 33935 »

[单片机(51,AVR,MSP430等)Nokia-5110LCD-driver-routines

说明:诺基亚手机5110屏幕的C语言驱动程序,基于KEIL软件开发的单片机程序。-Nokia 5110 screen C language driver, microcontroller based KEIL software development process.
<韩雷> 在 2025-03-17 上传 | 大小:1.13mb | 下载:0

[嵌入式Linuxlinux2.6.39.2_yaffs2.tar

说明:修改好的yaffs2在linux上移植的代码,需要的可以-Modify good yaffs2 on linux transplant code, need to look at
<陈胜> 在 2025-03-17 上传 | 大小:95kb | 下载:0

[嵌入式Linuxlinuxrom-s3c2440-nfs

说明:已经移植好的linux nfs文件系统,需要的可以直接烧到fl2440 arm板上-Has been ported good linux nfs file system, can directly burn fl2440 arm board
<陈胜> 在 2025-03-17 上传 | 大小:2.48mb | 下载:0

[嵌入式Linuxbuildroot

说明:linux下交叉编译器的制作,很好的教程-Under linux cross compiler produced good tutorial
<陈胜> 在 2025-03-17 上传 | 大小:3kb | 下载:0

[嵌入式Linuxramdisk

说明:linux内核移植教程,跟着步骤做就可以了-linux kernel porting tutorial, follow the steps can be done
<陈胜> 在 2025-03-17 上传 | 大小:17kb | 下载:0

[嵌入式Linuxubootfenxi

说明:uboot第一段代码分析,简单易懂,能更好的理解uboot移植的过程-uboot first code analysis, easy to understand, to better understand the process of porting uboot
<陈胜> 在 2025-03-17 上传 | 大小:522kb | 下载:0

[VHDL编程asyn-fifo

说明:功能就是一个FIFO,first in first out!避免跨时钟域的亚稳态-Function is a FIFO, first in first out! To avoid the cross clock domain metastable
<zhusiwei> 在 2025-03-17 上传 | 大小:183kb | 下载:0

[VHDL编程DES_des

说明:DES 使用一个 56 位的密钥以及附加的 8 位奇偶校验位(每组的第8位作为奇偶校验位),产生最大 64 位的分组大小。这是一个迭代的分组密码,使用称为 Feistel 的技术。-DES uses a 56 bit key and an additional 8 bit parity bit (n = eighth as the parity bit), the largest 64 bit packet size. This is
<zhusiwei> 在 2025-03-17 上传 | 大小:191kb | 下载:0

[嵌入式Linuxgt9xx

说明:goodix gt9xx.h 触控芯片 驱动源程序-tp ic driver.c
<wdy> 在 2025-03-17 上传 | 大小:15kb | 下载:0

[VHDL编程tlc549adc

说明:FPGA AD数据采集模块,实现模拟信号到数字信号转换。-FPGA AD data acquisition module, the analog signal to digital signal conversion.
<刘芳> 在 2025-03-17 上传 | 大小:670kb | 下载:0

[其他嵌入式/单片机内容Template

说明:this examlpe shows how to configure the TIM peripheral in PWM(Pulse Width Modulation mode). the four PWM signals generated with different duty cycles are then fed to the robot CC motor phase. Display menu to choose
<rima> 在 2025-03-17 上传 | 大小:9.22mb | 下载:0

[DSP编程SCI---example

说明:28335的SCI例程,最优化的串口接收和发送,应用在实际项目中-28335 of SCI routines optimized serial port receive and transmit, in practical projects
<杨马> 在 2025-03-17 上传 | 大小:1.65mb | 下载:0
« 1 2 ... .97 .98 .99 .00 .01 27702.03 .04 .05 .06 .07 ... 33935 »

源码中国 www.ymcn.org