资源列表
[单片机(51,AVR,MSP430等)] 6050--
说明:使用51单片机采集6050角位移芯片的数据,进行控制水平仪的水平角度-this txt is the LED code,use it can flight the led for 51.<付学丹> 在 2024-10-06 上传 | 大小:41984 | 下载:0
[单片机(51,AVR,MSP430等)] Pwm
说明:空间电压矢量控制PWM(SVPWM)也叫磁通正弦PWM法.它以三相波形整体生成效果为前提,以逼近电机气隙的理想圆形旋转磁场轨迹为目的,用逆变器不同的开关模式所产生的实际磁通去逼近基准圆磁通,由它们的比较结果决定逆变器的开关,形成PWM波形.此法从电动机的角度出发,把逆变器和电机看作一个整体,以内切多边形逼近圆的方式进行控制,使电机获得幅值恒定的圆形磁场(正弦磁通).-Space voltage vector control PWM (S<谢洁> 在 2024-10-06 上传 | 大小:198656 | 下载:0
[VHDL编程] AVA6SV2_LCD
说明:Vhdl Code for lcd 16*2 . display text and how to rotate a text in lcd with pure vhdl code<mehdi> 在 2024-10-06 上传 | 大小:80896 | 下载:0
[VHDL编程] AVA6SV2_DIPLED
说明:A project in vhdl that uses 74hc595 to read up to 16 key and write to 4*7seg simultaneously in pure vhdl code.<mehdi> 在 2024-10-06 上传 | 大小:304128 | 下载:0
[其他嵌入式/单片机内容] SMS-Sender
说明:full code of a sim900 module . written in codevision avr with keyboard and lcd 128*64. write you message with keyboard directly connected to avr and edit your message in lcd then press F2 to send the message with sim<mehdi> 在 2024-10-06 上传 | 大小:347136 | 下载:0
[单片机(51,AVR,MSP430等)] kalman
说明:两轮平衡小车实现源码,kalman滤波实现姿态修正,pid整定控制小车平衡。-Two rounds of car the balance of the source code, the kalman filter to realize attitude correction, pid adjusting control the car balance.<小马> 在 2024-10-06 上传 | 大小:58368 | 下载:0
[嵌入式Linux] STM32-duqumpu
说明:stm32f103rct6读取MPU6050六轴的C语言程序-stm32f103rct6 read MPU6050 six axes of C language program<邱玉东> 在 2024-10-06 上传 | 大小:10240 | 下载:0
[VHDL编程] 4bitmultiplier
说明:its a verilog coding of a multiplier. it multiply 2 values each of width having 4bit<nizam42> 在 2024-10-06 上传 | 大小:1024 | 下载:0
[单片机(51,AVR,MSP430等)] TDCmeasure
说明:TDC测时间脉冲,使用单片机开发,时间精确-TDC measure time pulse<汪洋> 在 2024-10-06 上传 | 大小:8908800 | 下载:0
[单片机(51,AVR,MSP430等)] miaobiao
说明:基于51单片机的秒表完整程序,内涵c语言程序,protues仿真-51 microcontroller-based stopwatch complete program, connotation c language program, protues simulation<nina> 在 2024-10-06 上传 | 大小:62464 | 下载:0
[VHDL编程] Sequence-Detector
说明:利用状态机设计一个序列检测器,用以检测“1101”。用btn[1]和btn[0]作为输入分别代表1和0,输入的当前数字显示在数码管最后一位,每当新输入一个数字,之前输入的数字左移一位,依次显示出最近输入的四位数字,无输入时数码管不显示任何数字。clk时钟需要分频后才可作为检测时钟(建议分频至190Hz),每当检测到序列中有“1101”出现时,led[0]点亮,即数码显示管上显示“1101”时led[0]点亮;当按下btn[2]时恢复初始<刘东辉> 在 2024-10-06 上传 | 大小:4096 | 下载:0