资源列表
[单片机(51,AVR,MSP430等)] lpc177x_8x_uart
说明:NXP177x-UART驱动程序,项目实测通过-NXP177x-UART driver, measured by the project<周国祥> 在 2024-09-20 上传 | 大小:5120 | 下载:0
[单片机(51,AVR,MSP430等)] lpc177x_8x_can
说明:NXP 177x CAN驱动例子,性能良好,可用于实际项目-NXP 177x CAN drive, good performance, it can be used in the actual project<周国祥> 在 2024-09-20 上传 | 大小:3072 | 下载:0
[单片机(51,AVR,MSP430等)] Bootloader-master
说明:Pixhawk四轴飞行器控制板的Bootloader 功能很强大-Pixhawk axis aircraft control board Bootloader Very powerful<jikemuyi> 在 2024-09-20 上传 | 大小:48128 | 下载:0
[微处理器(ARM/PowerPC等)] PWM_Servo
说明:ADI公司的最新芯片CM40X系列电机控制例程;包含CM403和CM408,适合初次接触此芯片的用户。-ADI s latest chip CM40X series motor control routine contains CM403 and CM408, for the initial contact with this chip users.<李力> 在 2024-09-20 上传 | 大小:2816000 | 下载:0
[VHDL编程] a_vhd_16550_uart
说明:Using the UART core is the similar to using the standard 16550 UART, expect that the FIFO’s are always enabled, and there is no sticky parity.<丁一> 在 2024-09-20 上传 | 大小:131072 | 下载:0
[VHDL编程] fpu_double
说明:The Verilog version of the code is in folder “fpu_double”, and the VHDL version is in folder “double_fpu”. There is a readme file in each folder, and a testbench file to simulate each core. These cores are designed t<丁一> 在 2024-09-20 上传 | 大小:244736 | 下载:0
[单片机(51,AVR,MSP430等)] u-boot-2015.01
说明:U-BOOT最新版本源码, 可以支持多种型号的CPU-U-BOOT lastest code, it supports kinds of cpu<丁一> 在 2024-09-20 上传 | 大小:16299008 | 下载:0
[单片机(51,AVR,MSP430等)] 7289-128
说明:LED显示芯片ZLG7289的驱动代码,单片机是ATMEL128-The drive for ZLG7289 to display LED, the processor is ATMEL128<xiao> 在 2024-09-20 上传 | 大小:30720 | 下载:0
[单片机(51,AVR,MSP430等)] RTC
说明:STM32Cube RTC初始化部分替换,原固件库函数不能处理有电池后备的情况.-STM32 Cube RTC initialization part replacement, the original firmware library functions can not handle the case of battery back-up.<金永生> 在 2024-09-20 上传 | 大小:3072 | 下载:0
[嵌入式Linux] qrencode-3.4.4.tar
说明:基于C语言的QRCODE二维码生成代码,简单修改后可用在单片机LCD上显示。-QRCODE is generated based on the C language code, after simple modification can be used to display the microcontroller LCD.<余兵> 在 2024-09-20 上传 | 大小:468992 | 下载:0
[单片机(51,AVR,MSP430等)] SD
说明:AVR单片机通过SPI协议读写SD卡的程序,其编译环境是CVAVR.-This program is about reading and writting SD card with SPI protocol by AVR processor.<xiao> 在 2024-09-20 上传 | 大小:36864 | 下载:0
[单片机(51,AVR,MSP430等)] PWM
说明:使用AVR单片机生产PWM波,可作为PWM波控制电机的参考-Generate PWM by ATMEL16L, can be used as the reference for motor control<xiao> 在 2024-09-20 上传 | 大小:17408 | 下载:0