资源列表
[其他嵌入式/单片机内容] DM6446_nandflash
说明:DM6446官方DEMO板中NAND FLASH的读写测试程序,CCS下编译通过,相当于驱动,能读能写!-Official DM6446 NAND FLASH DEMO board to read and write in the test program, CCS through the compiler, the equivalent of driving, can read and write!<托尼> 在 2025-03-04 上传 | 大小:104kb | 下载:0
[其他嵌入式/单片机内容] DS1302
说明:基于AT8951_C的DS1302温度测量加上LCD12864的显示-Based on the AT8951_C DS1302 temperature measurement and LCD12864 display<caidejia> 在 2025-03-04 上传 | 大小:2.19mb | 下载:0
[DSP编程] DM6446_rs232
说明:DM6446的标准232驱动,在CCS下编译通过,直接运行发送数据!-DM6446' s standard 232 drive, in the CCS compiler, run directly send data!<托尼> 在 2025-03-04 上传 | 大小:84kb | 下载:0
[其他嵌入式/单片机内容] Jhd-162aPDs18b20
说明:基于89c51的温度计设计程序。此程序是利用温度传感器ds18b20和jhd162a液晶显示共同完成的温度计。-89c51 thermometer based on the design process. This program is the use of temperature sensors and jhd162a ds18b20 together to complete the liquid crystal display th<安静> 在 2025-03-04 上传 | 大小:2kb | 下载:0
[单片机(51,AVR,MSP430等)] MAX232
说明:基于AT51_C的MAX232串口通讯,能传汉字-Based on the AT51_C MAX232 serial communication, pass characters<caidejia> 在 2025-03-04 上传 | 大小:18kb | 下载:0
[单片机(51,AVR,MSP430等)] DM6446_usb_power
说明:DM6446的USB最底层发包收包代码,不含协议,学习的最好代码!仅仅发送接收数据!-DM6446' s USB lowest bidding closed package code, a protocol, to learn the best code! Just sending and receiving data!<托尼> 在 2025-03-04 上传 | 大小:94kb | 下载:0
[嵌入式Linux] DM6446_vga_loop
说明:DM6446外挂640X480的TFT真彩液晶驱动!本人亲自从linux复杂的缓存驱动中分离出来,目前是一个初始化的代码,能把屏幕显示一个纯色!对于做linux开机启动画面来说很重要!可以移植到U-BOOT下!此代码在CCS下编译通过!-Plug the DM6446 640X480 TFT true color LCD driver! I personally drive from the linux cache complex se<托尼> 在 2025-03-04 上传 | 大小:176kb | 下载:0
[单片机(51,AVR,MSP430等)] accuracy
说明:基于AT8951_C的角度芯片(成功),精度在0.1度.-Based on the point of view of the AT8951_C chip (successful), accuracy in 0.1 degrees.<caidejia> 在 2025-03-04 上传 | 大小:28kb | 下载:0
[单片机(51,AVR,MSP430等)] SmartCar
说明:飞思卡尔智能汽车的控制程序,包括电机、舵机控制。供大家交流学习-Freescale' s intelligent car control procedures, including motor, servo control. For everyone to share their knowledge<Beck> 在 2025-03-04 上传 | 大小:14kb | 下载:0
[嵌入式Linux] linux_2_6_v1_03_a
说明:此代码为XILINX的V4平台专用,对应的linux驱动!硬件都是固化的,上的POWERPC硬核!要用的话请对应自己生成的内核修改对应的基地址!-The code for the V4 platform dedicated XILINX, the corresponding linux driver! Hardware are cured, the POWERPC hard core! Please use it to generate<托尼> 在 2025-03-04 上传 | 大小:567kb | 下载:0