资源列表

« 1 2 ... .69 .70 .71 .72 .73 25874.75 .76 .77 .78 .79 ... 33935 »

[VHDL编程DDS

说明:多功能讯号发生器,产生方波,三角波,锯齿波-Multi-function signal generator to produce a square wave, triangle wave, sawtooth
<> 在 2025-04-23 上传 | 大小:857kb | 下载:0

[VHDL编程verilog-LCD1602

说明:LCD1062的驱动程序,实现液晶模块的显示功能-LCD1062 driver, realize the functions of showing the LCD module
<hay> 在 2025-04-23 上传 | 大小:7kb | 下载:0

[VHDL编程Traffic

说明:交通灯,实现红绿灯功能,2. 东西红灯亮30秒(南北绿灯亮30秒); 3. 东西红灯闪烁6秒(0.5秒灭-0.5秒亮) (南北黄灯亮6秒); 4. 东西绿灯亮30秒(南北红灯亮30秒); 5. 东西黄灯亮6秒(南北红灯闪烁6秒)?(下一个循环); 6. 分别用6个发光二极管代表红绿黄灯; 7. 在2个数码管上显示倒计时; -Traffic lights, traffic lights function to ac
<> 在 2025-04-23 上传 | 大小:146kb | 下载:0

[VHDL编程Text-LCD-module

说明:关于液晶驱动的verilog语言,有具体的编写分析-About the verilog liquid crystal drive language, there are specific writing analysis
<hay> 在 2025-04-23 上传 | 大小:60kb | 下载:0

[VHDL编程april2010_1

说明:基于FPGA的方向滤波指纹图像增强算法实现。目前指纹识别已发展成应用最广泛的一种生物识别技术。-The direction of FPGA-based fingerprint image enhancement filtering algorithms. Currently the most widely used fingerprint recognition has become a kind of biometric techno
<单善> 在 2025-04-23 上传 | 大小:907kb | 下载:0

[VHDL编程verilog1602

说明:终于搞定了这个lcd液晶显示的程序,净是犯些不该犯的错误,还本人找了那么久,先是仿真查了所有时钟信号,又查了lcd_rs和lcd_rw,都没有错-Finally fix the LCD program, clean is a hideous make some stupid mistakes, I look for so long, the first looked up all the clock signal, and checke
<hay> 在 2025-04-23 上传 | 大小:8kb | 下载:0

[VHDL编程m8051_1c3

说明:基于cyclone I 代 80C51IP核-80C51IP based cyclone I-generation nuclear
<> 在 2025-04-23 上传 | 大小:210kb | 下载:0

[DSP编程TMS320F281X

说明:TMS320x28xx, 28xxx DSP Peripheral Reference Guide Reference Guide,Event Manager (EV) Reference Guide (Rev. A),Enhanced Controller Area Network (eCAN) Reference and etc.
<while> 在 2025-04-23 上传 | 大小:19.52mb | 下载:0

[VHDL编程LCD

说明:LCD驱动器的完整代码,详细verilog编程-LCD drive complete code, verilog detailed programming
<hay> 在 2025-04-23 上传 | 大小:1.05mb | 下载:0

[VHDL编程FPGAadder

说明:现场可编程门阵列(FPGA)是目前应用非常广泛的一种专用集成电路。在FPGA平台上实现了2位全加器硬宏的设计-Field programmable gate array (FPGA) is widely used as a specific integrated circuit. The FPGA platform for a two full adder hard macro design
<单善> 在 2025-04-23 上传 | 大小:750kb | 下载:0

[VHDL编程FPGAapFFT

说明:介绍采用FPGA器件实现apFFT算法,精度高于模拟式测量,并且适用性强、成本低-Describes the use of FPGA devices to achieve apFFT algorithms, accuracy is higher than an analog measurement, and applicability, low cost
<单善> 在 2025-04-23 上传 | 大小:433kb | 下载:0

[单片机(51,AVR,MSP430等)ATMEGA128

说明:– 133 条指令 – 大多数可以在一个时钟周期内完成   – 32 x 8 通用工作寄存器 + 外设控制寄存器   – 全静态工作   – 工作于16 MHz 时性能高达16 MIPS   – 只需两个时钟周期的硬件乘法器---133 Instruction- most can be completed in one cycle- 32 x 8 General Purpose Working Registers+ Peripheral
<陶志华> 在 2025-04-23 上传 | 大小:2.57mb | 下载:0
« 1 2 ... .69 .70 .71 .72 .73 25874.75 .76 .77 .78 .79 ... 33935 »

源码中国 www.ymcn.org