资源列表

« 1 2 ... .38 .39 .40 .41 .42 1043.44 .45 .46 .47 .48 ... 1228 »

[串口编程i2c_master

说明:一个好用的I2C接口master的verilog程序。 -A master-to-use interface for Verilog I2C procedures.
<王晓琴> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程i2c_slave

说明:一个好用的经过FPGA验证的i2c_slave verilog代码。-After a useful FPGA proven i2c_slave verilog code.
<王晓琴> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程eseecon

说明:CSerialPort 串口通信类,与mscomm功能类似,使用简单-CSerialPort serial communications, and MSComm function is similar to using a simple
<cy> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程T905

说明:这是一个nRF905和232接口的程序源代码。对无线数传模块初学者有很大的帮助。-This is a nRF905 and 232 of the source code. Of the wireless module has a great help for beginners.
<李婷> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程sms

说明:用串口连接GSM手机发送和接收短消息,在应用程序中如何编程实现?-GSM mobile phone with serial connection to send and receive text messages, how in the application programming?
<achesser> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程Ration

说明:/*系统时钟采用 Fosc=7.373 定时器方式1的定时时间 Time=(65536-THTL)*2/Fosc,默认5ms 定时器1工作在16位,用作系统时钟 定时器0工作在16位,作为定时开始采样用,定时范围为0.1ms(0xfe8f)-15ms(0x27fe),默认为1ms=0xf19a,可以通过设置命令改变 串行口波特率由内部产生,11.059MHz->BRGR1:0=0x0050=115200Bps,0x
<achesser> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程mscomm

说明:简单的利用MSCOMM进行RS232通讯程式
<毛家鑫> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程Com_comAPI

说明:VB串口通信的方法,可以学习到如何和计算机串口进行通信-VB serial communication method, you can learn how to and computer serial port to communicate
<钟声> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程cnComm

说明:根据网资整理的一个串口通信类,很好用!已经调试成功,可用。希望可以帮助大家,来减少重复的工作。同时,我们也要向原作者表示感谢。-According to organize a network of funding serial communications, a very good use! Have been debug successful, can be used. I hope everyone can help to redu
<liehdci> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程youxiaozhicaijiVB

说明:51作处理器,0809采集数据,比较大小,去掉最大值(毛刺),即有效值的采集,再用串口传到单片机上-51 for the processor, 0809 data collection, compare the size, remove the maximum (Burr), the RMS of the collection, and then reached the single-chip serial port on
<魏娇> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程ComTF

说明:一个小型的串口通信程序 在Turboc2下可直接编译 经测验通信非常可靠 可改为一个下载程序哦-A small Turboc2 serial communication program can be compiled directly by the test very reliable communications can be changed to a download Oh
<鲁光耀> 在 2024-09-28 上传 | 大小:4096 | 下载:0

[串口编程ARM_GPS

说明:硬件平台:开发板创维特jx2410,gps模块HOLUX GR-87,USB转串口线一条。程序是在嵌入式linux操作系统下读串口实现。-Hardware platform: development board SKYWORTH special jx2410, gps Module HOLUX GR-87, USB to serial line. Procedure is in the embedded linux operating
<huang> 在 2024-09-28 上传 | 大小:4096 | 下载:0
« 1 2 ... .38 .39 .40 .41 .42 1043.44 .45 .46 .47 .48 ... 1228 »

源码中国 www.ymcn.org