文件名称:serial
介绍说明－－下载内容均来自于网络，请自行研究使用
本模块的功能是验证实现和PC机进行基本的串口通信的功能。需要在PC机上安装一个串口调试工具来验证程序的功能。
程序实现了一个收发一帧10个bit（即无奇偶校验位）的串口控制器，10个bit是1位起始位，8个数据位，1个结束位。
串口的波特律由程序中定义的div_par参数决定，更改该参数可以实现相应的波特率。程序当前设定的div_par 的值
是0x145，对应的波特率是9600。用一个8倍波特率的时钟将发送或接受每一位bit的周期时间划分为8个时隙以使通
信同步.-The function of this module is to verify the basic serial communication and PC. Need to be installed on a PC with a serial debugging tools to verify the functionality of the program.
The program implements a send and receive a 10-bit (ie, no parity bit) serial controller, 10 bit is a start bit, 8 data bits, 1 stop bit.
The serial port s baud law determined by the procedures defined in div_par parameters, change the parameters to achieve the appropriate baud rate. The value of the procedures set div_par
0x145, corresponding to the baud rate is 9600. An eight times the baud rate clock to send or receive every bit of the cycle time is divided into eight time slots so that through
Letter synchronization.
程序实现了一个收发一帧10个bit（即无奇偶校验位）的串口控制器，10个bit是1位起始位，8个数据位，1个结束位。
串口的波特律由程序中定义的div_par参数决定，更改该参数可以实现相应的波特率。程序当前设定的div_par 的值
是0x145，对应的波特率是9600。用一个8倍波特率的时钟将发送或接受每一位bit的周期时间划分为8个时隙以使通
信同步.-The function of this module is to verify the basic serial communication and PC. Need to be installed on a PC with a serial debugging tools to verify the functionality of the program.
The program implements a send and receive a 10-bit (ie, no parity bit) serial controller, 10 bit is a start bit, 8 data bits, 1 stop bit.
The serial port s baud law determined by the procedures defined in div_par parameters, change the parameters to achieve the appropriate baud rate. The value of the procedures set div_par
0x145, corresponding to the baud rate is 9600. An eight times the baud rate clock to send or receive every bit of the cycle time is divided into eight time slots so that through
Letter synchronization.
(系统自动生成,下载前可以参看下载内容)
下载文件列表
串口\cmp_state.ini
....\db\add_sub_5ph.tdf
....\..\add_sub_aph.tdf
....\..\serial.db_info
....\..\serial.eco.cdb
....\..\serial.sld_design_entry.sci
....\..\serial_cmp.qrpt
....\serial.asm.rpt
....\serial.cdf
....\serial.done
....\serial.dpf
....\serial.fit.eqn
....\serial.fit.rpt
....\serial.fit.smsg
....\serial.fit.summary
....\serial.flow.rpt
....\serial.map.eqn
....\serial.map.rpt
....\serial.map.summary
....\serial.pin
....\serial.pof
....\serial.qpf
....\serial.qsf
....\serial.qws
....\serial.tan.rpt
....\serial.tan.summary
....\serial.v
....\serial.v.bak
....\serial_assignment_defaults.qdf
....\db
串口
....\db\add_sub_5ph.tdf
....\..\add_sub_aph.tdf
....\..\serial.db_info
....\..\serial.eco.cdb
....\..\serial.sld_design_entry.sci
....\..\serial_cmp.qrpt
....\serial.asm.rpt
....\serial.cdf
....\serial.done
....\serial.dpf
....\serial.fit.eqn
....\serial.fit.rpt
....\serial.fit.smsg
....\serial.fit.summary
....\serial.flow.rpt
....\serial.map.eqn
....\serial.map.rpt
....\serial.map.summary
....\serial.pin
....\serial.pof
....\serial.qpf
....\serial.qsf
....\serial.qws
....\serial.tan.rpt
....\serial.tan.summary
....\serial.v
....\serial.v.bak
....\serial_assignment_defaults.qdf
....\db
串口