搜索资源列表
usb-slave-s3c2410
- ARM S3C2410 USB SLAVE LINUX驱动
usb51s_v0.4程序源代码
- KeilC51下的USB的slave设备源码,MCS51开发.-In KeilC51 environment, slave device source code for USBand the exploitation for MCS51
ch375
- CH375 是一个USB总线的通用接口芯片,支持USB-HOST主机方式和USB-DEVICE/SLAVE设备方式。在本地端,CH375具有8位数据总线和读、写、片选控制线以及中断输出,可以方便地挂接到单片机/DSP/MCU/MPU等控制器的系统总线上。在USB主机方式下CH375还提供了串行通讯方式,通过串行输入、串行输出和中断输出与单片机/DSP/MCU/MPU 等相连接。 CH375 的USB 设备方式与CH372 芯片完全兼容
SL811_slave
- 采用SL811(工作在slave模式)实现USB设备的firmware参考源码。-use SL811 (in slave mode) to achieve the USB device firmware Participation source test.
USB_Project_Report
- USB项目开发报告,也是USB大牛Frank_wang的大作,比较详细,非常适合开发USB人员参考-USB project development report, as well as large cattle USB Frank_wang the crescendo, and in greater detail, very suitable for the development of USB reference
USBMem
- 本代码实现了USB slave驱动,很具参考价值-The code achieved a USB slave drive, it is a reference value
SL811HSTslave
- SL811HST与51单片机组成usb从机的程序-SL811HST with 51 single-chip component the procedure usb slave
FX2-Slave-FIFO
- 这是基于CY7C68013芯片,工作于slave FIFO模式的数据传输的程序。包括USB固件程序的程序框架和传输功能实现程序。-This is based on the CY7C68013 chip, working in slave FIFO mode data transfer procedure. Including USB firmware fr a mework of the procedure and transfer f
canbus4linux
- ARM S3C2410 USB slave 驱动-ARM S3C2410 USB slave driver
usb-slave-s3c2410
- ARM S3C2410 USB SLAVE LINUX驱动-ARM S3C2410 USB SLAVE LINUX driver
USB-slavefifo
- 本组程序包括FPGA程序,固件程序和上位机程序,实现USB的数据传输功能,采用Slave Fifo模式,上位机程序利用Cypress公司提供的库函数进行开发-In this group include FPGA, firmware, procedures and PC procedures realize USB data transfer function, the Slave Fifo mode, host computer pro
Slave_FIFO_ep2out_16bit
- 用Keil C语言编写的EZ-USB CyC768013芯片 slave FIFO模式的固件程序-Keil C language using the EZ-USB CyC768013 chip slave FIFO mode firmware
usb
- 使用68013的测试程序,包含68013固件程序(采用slave FIFO bulk同步读写,EP2 OUT,EP6 IN),驱动,PC端测试用程序。CPLD的VHDL代码-Test procedures for the use of 68,013, including 68,013 firmware (using the synchronous slave FIFO bulk read and write, EP2 OUT, EP6
SJCJVC
- USB通讯Slave FIFO,包含驱动。已经调试过了,可以用。-USB communications Slave FIFO, includes driver. Have been debug can be used.
bulkloop
- EZ-USB FX2 SLAVE FIFO模式固件代码-EZ-USB FX2 SLAVE FIFO mode firmware code
usb
- USBHostSlave is a USB 1.1 host and Device IP core. – Supports full speed (12Mbps) and low speed (1.5Mbps) operation. – USB Device has four endpoints, each with their own independent FIFO. – Supports the four types
Slave
- USB从机程序,可以做广泛的移植,是应用很广泛的程序,可移植性强-USB slave process a wide range of transplant can be done is to apply a wide range of procedures, strong portability
USB-slave-driver
- 基于s3c2410平台开发的USB从口驱动,它提供了对USB从口的基本操作。对USB从口的理解有很大帮助。-S3c2410-based platform from the USB port driver, which provides for the USB from the mouth of the basic operation. USB from the mouth of the understanding of much hel
u-boot-usb-slave--function
- mini2440 实现u-boot的usb slave下载功能 -the mini2440 achieve u-boot usb slave
src
- 该软件为基于GD平台的usb-slave软件代码(The software is based on the software code of GD chip USB-SLAVE)