搜索资源列表
stm8s003-manual
- stm8s003开发手册 s tm8s003开发手册-stm8s003 manual stm8s003 manual stm8s003 manual
STM8s003
- 如何编程STM8s003，操作里面的寄存器，简单易懂，操作方便。-How to STM8 programming fundamentals of must-see, easy to understand, easy to operate.
stm8s003
- 上传一个STM8S003头文件一个，直接地址寄存器版-Upload a STM8S003 header file a direct address register edition
STM8S003-voltmeter
- stm8s003 4-30.00v 数码管显示电压表-stm8s003 4-30.00v digital display voltmeter
STM8S003-Key_Scan
- STM8S003-Key_Scan 例程-STM8S003-Key_Scan
STM8S003-IR-RECE
- STM8S003 红外数据接收和已添加所有外设配置，可以帮助减少产品开发时间-STM8S003 IR RECEIVE AND ALL Peripheral configuration
STM8S003-TIM2-PWM
- STM8S003 TIM2通道3PWM输出-STM8S003 TIM2 Channel 3 PWM output
stm8S003-adaptor0.03
- Stm8s003 small development board designed using Kicad PCB Software.
Stm8s003-voltmeter
- stm8s003 电压表 原理图与源代码 IAR环境-Stm8s003 voltmeter schematic and source code IAR environment
stm8s003__V01_IAR
- 采用stm8s003设计的红外发射控制灯程序，此程序已经经过实践，符合要求。(Stm8s003 design of infrared emission control lamp procedures)
STM8S003转SC93F5003代码参考
- STM8S003转SC93F5003代码参考,(STM8S003 to SC93F5003 code)
STM8S003F3通过PWM波实现三基色呼吸灯程序
- STM8S003通过PWM实现呼吸灯(Display Breathing light Using PWM Of STM8S003)
stm8s003原理图
- 距离检测，stm8s003近距离，用于照明应用。(Distance detection, stm8s003, are used for illumination applications at close range.)
RFM73_TX_STM8S003
- RFM73 FR modul and STM8S003 to transmit command
SX1278 Demo
- sx1278的demo代码,，用stm8s003单片机，发送接收无线循环(sx1278 demo code,with stm8s003 mcu,tx and rx again and again)
CODE_1
- 人体感应模块+stm8s003，检测到人用单片机控制LED灯亮(The human body sensing module +stm8s003 detects that people use single-chip microcomputer to control LED lights)
STM8S003 -OLED(IIC)
- STM8S003的OLED(IIC版)驅動,開發環境IAR(1.40)for STM8,已測試過,顯示6x8及8x16字型,顯示40x40點陣圖,指定位置顯示進度條.
STM8S003PLT8920_TX_RX
- 超级便宜的STM8S003+LT8920收发代码 分TX和RX两个工程 驱动和主函数都有 自己做项目的话可以直接移植使用(Super cheap STM8S003+ LT8920 transceiver code points, TX and RX drive and the main function has its own two engineering project can be transplanted directly
STM8S003_OLED
- STM8S003的OLED(IIC版)驅動,開發環境IAR(1.40)for STM8,已測試過,顯示6x8及8x16字型,顯示40x40點陣圖,指定位置顯示進度條.(STM8S003 OLED (I2C version) driver, development environment IAR (1.40) for STM8, has been tested, display 6x8 and 8x16 font, display 40x
STM8S003 进行CRC校验试验
- 在STM8S003基础上，程序对CRC进行了简单的测试与验证。