搜索资源列表
stm8_prj
- stm8单片机PWM输出,调试通过,IAR开发,类似51的程序。-stm8 microcontroller PWM output, debug through, IAR development, similar to the 51 programs.
PWM_DA_DIV
- STM8处理器,因项目需要8路PWM转DA通道输出,故写了模拟类型的PWM输出,频率由定时器统一调节,占空比可以独立调节与关断。-STM8 processor, because the project needs to turn DA 8 PWM output channels, so write simulate the type of PWM output frequency is adjusted by the timer uni
1-STM8S_Demo
- 关于STM8S,利用ADC采集电压,输出pwm波形的输出。通过调节ADC电压,控制PWM输出。采用IAR for stm8开发环境。-On the STM8S, using the ADC collection of voltage, the output PWM waveform output. By adjusting the ADC voltage, PWM output control. Use IAR for stm8 dev
10-PWM
- STM8单片机PWM输出控制方法,基于寄存器方式编写,亲测可以运行-STM8 microcontroller PWM output control method, register-based approach to the preparation, pro-test run
pwm-4out
- stm8 4路输出pwm ,占空比可调,输出可调-Stm8 4-way output PWM duty ratio is adjustable, adjustable output
STM8
- STM8相关学习教程、CCO输出、PWM方波、TIM2定时器-CCO output, PWM square wave, TIM2 timer
2.4G-receive
- STM8 2.4G接收初始化,和把接收到的数据来输出PWM。- STM8 2.4G receive initialization, and the received data to output PWM.
stm8_play_wav_by_wang@2017-7-7
- 通过串口将音频数据发往stm8,stm8通过互补的pwm通道输出BTL推动喇叭播放音乐。wav格式为16K采样8bit模式,附带了xp的录音机可以进行格式转换。(Through the serial port to the audio data sent to stm8, stm8 through the complementary pwm channel output BTL to promote the speaker to pla
wireless
- 使用stm8s系列输出四路PWM波,详细说明(The stm8s series output four PWM wave is described in detail.)
17.使用TIM1定时器产生PWM波形输出
- 单片机STM8使用TIM1定时器产生PWM波形输出(Single chip microcomputer STM8 uses a TIM1 timer to produce PWM waveform output)
stm8-AIN0 采集
- 利用 AIN0 采集旋钮的电压值,TIM2_CH1 捕获红外信号 ,TIM1_CH1 输出PWM 控制灯光 。(The voltage value of the knob is collected by AIN0, the TIM2_CH1 is captured by the infrared signal and the TIM1_CH1 output PWM controls the light.)