搜索资源列表
STM32-P107_DemoSoft_revB
- server for stm32f7-server for stm32f7xx
mb1191
- stm32f7 development board
STM32F7-PCB-
- STM32F7开发板PCB图纸 ALTIUM格式可以直接打板
STemWin
- 基于STM32F7的中文显示，在LCD屏幕上显示中文-based on theSTM32F7 with Chinese display
LibJPEG
- 基于STM32F7的关于图片解码的源代码，JPEG格式，能够在LCD上显示-with the JPEG code STM32F7
FatFs
- 基于STM32F7的文件系统设计语言，能够在LCD上显示SD卡内的文件信息；-based on STM32F7 FAtFS
Audio
- 基于STM32F7，利用I2S传输音频。-based on STM32F7，using I2S send the audio data
STM32F7measure
- STM32F7多功能测试仪上位机 这里面有上位机不是源码，有通信协议的源码-STM32F7 multifunction tester PC and there are not a PC source, there is a communication protocol source code
stm32f7 camera drive
- STM32F767 开发板具有 DCMI 接口，并板载了一个摄像头接口（P7）， 该接口可以用来连接 OV5640/OV2640 等摄像头模块。本章，我们将使用 STM32实现摄像头功能(STM32F767 development board has the DCMI interface and on-board a camera into the interface (P7), The interface can be used
myMPU6050
- 可以直接基于STM32F7来调试陀螺仪加速度计模块MPU6050(you can use this project to debug MPU6050 depend on STM32F7)
STM32F7ucosiii任务创建
- 在stm32f7处理器上进行任务的基于ucosiii系统的创建于删除，通过显示屏和串口来查看任务状态(A ucosiii based system for tasks on a stm32f7 processor is created to delete and display task status through the display and serial ports)
STM32F7ucosiii-任务挂起与恢复
- 将ucos-iii系统运行与stm32f7单片机上实现任务的挂起与恢复(Ucos-iii system operation and stm32f7 MCU to achieve the task of hanging up and recovery)
STM32F7ucosiii-时间片转调度
- 在STM32F767单片机上运行ucos-iii系统实现同优先级的时间片转调度(Run the ucos-iii system on the STM32F767 MCU to realize the scheduling of the same priority time slice)
stm32f767-master
- 搭建stm32开源开发环境，以vscode作为编译器,ubuntu作为操作系统，arm-none-eabi-gcc作为编译工具链，来编写编译stm32程序，以stm32f767为例(Build STM32 open source development environment, using vscode as the compiler, Ubuntu as the operating system, arm-none-eabi-gcc
ADS1115
- 采用STM32F7完成了ADS1115的驱动程序，并用LCD进行显示(The driver of ADS1115 is completed by STM32F7, and is displayed by LCD)
数字示波器
- 以STM32F7为平台，使用RGBLCD屏制作的示波器显示界面(Using STM32F7 as the platform, the oscilloscope display interface is made with RGBLCD screen)
STM32F7开发指南-HAL库版本_V1.0
- 新手必看的经典开发指南,ST32F最强大的单片机(A classic guide to the development of a novice)
PWM输出实验
- 实验目的: 学习定时器的PWM功能 硬件资源: 1,DS0(连接在PB1) 2,定时器3(TIM3),使用TIM3通道4(CH4),将TIM3_CH4输出到PB1.从而实现PWM输 出控制DS0亮度. 实验现象: 本实验,DS0由暗到亮,再由亮到暗,再由暗到亮,依次循环.(stm32f7 pwm output Objective: Learning the PWM function of
TFT_LCD
- STM32F7的HAL库TFTLCD驱动，比较好用，有注释(STM32F7's HAL library TFTLCD drive, better used, annotated)
STM32F7开发指南-HAL库版本_V1.0
- STM32F7开发指南-HAL库版本_V1.0(STM32F7 Development Guide - HAL Library Version _V1.0)