搜索资源列表
stm3210x开发板流水灯
- 基于stm3210x开发板流水灯演示程序
基于ARM CORTEX M3 流水灯代码
- 基于ARM CORTEX M3 流水灯代码 能用 要根据STM3210X的型号来定义GPIO即可
FreeRTOS v7.1.0+STM3210x LIB v3.5 port on STM32103C8
- FreeRTOS v7.1.0+STM3210x LIB v3.5 + ENC28J60 port on STM32103C8
LED_Test
- stm3210x led 测试程序 可以在不同的cotex3核的arm核上运行-test procedure can be stm3210x led in a different arm of the nuclear cotex3 nuclear run
main
- 基于IAR的STM3210x cortex M3 spi例子-Based on IAR' s STM3210x cortex M3 spi example
SD_Driver
- stm32 sd driver stm3210X sd/mmc卡驱动程序代码，真的很好用啊-stm32 sd driver stm3210X sd/mmc card driver code, is actually pretty good ah
key
- 一个stm3210X的按键控制程序，本程序基于库函数实现。在Mini开发板实现。-A stm3210X key control procedures, the procedures based on library functions to achieve. Mini development board in the implementation.
ADC
- This examples describes how to use the ADCs in independent conversions.The platform is in stm3210x cortex_m3-This examples describes how to use the ADCs in independent conversions.The platform is in stm3210x cortex_m3
CORTEX_STM32L152_IAR
- FREERTOS下STM3210X IAR DEMO-FREERTOS STM3210X IAR DEMO
CORTEX_STM32F103_Keil
- FREERTOS STM3210X KEIL DEMO
ADC
- 本例程演示了STM32F103开发板上的ADC功能。运行时液晶屏上显示： STM3210x DEMO ADC Val：xxxx 其中xxxx为ADC转化模拟电压后的值,可以通过调节电位器的值来改变测量值-This routine demonstrates STM32F103 development board ADC function. Run time is displayed on the LCD screen: STM
Buzzer
- 使用STM3210X 系列蜂鸣片的驱动程序，支持2种频率和多种发声模式-Series of beeps piece of STM3210X driver supports two kinds of frequency and variety of vocal mode
STM3210X-DFU-(test-ok)
- stm32 dfu升级代码，在官网例程上修改。-stm32 dfu，namely usb iap。
STM32F10x_IAP_bootloader
- STM32单片机 串口bootloader ，IAP源码。测试过了。方便调试使用。方便商用升级代码，串口实现，方便改成USB接口-STM3210X uart bootloader IAP
ILI9320
- Ili9320 lib for stm3210x
STM32F10x_v3.5
- STM32F10x_v3.5 STM3210x系列代码实例集-STM32F10x_v3.5 sample code
9-HTTP_Client
- STM3210X HTTP_Client
LCD-12864
- 基于stm3210x系列单片机，控制LCD显示功能实现-Based stm3210x MCU, LCD display control functions to achieve
STM3210x中文参考手册
- STM3210x中文参考手册，stm3210X芯片学习用(STM3210x Chinese reference manual, stm3210X learning to use)
OneNET_BC95_LWM2M_0631
- 1.该程序是基于中移物联网的M5310模组的Demo移植而来，适用于移远的BC95_B8模组,功能与原程序基本一致，具体配置方法见main.c和bc95_config.h相关注释。 2.为了方便大家使用，去掉了传感器的驱动代码，可根据自己的需要添加传感器驱动代码，将read_callback()和res_update()函数中相应位置替换为你自己的传感器值。(1. The program is based on the demo mig