搜索资源列表
example10 can 243
- DSP TMS320LF243 CAN 接口程序-DSP TMS320LF243 CAN Interface Program
can-drv
- uClinux下can接口驱动程序，包含总线故障诊断及自恢复
CAN接口调试程序 LPC23XX
- LPC23XX的CAN接口调试程序
20060402
- CAN接口模块之模拟量输入模块即CAN模块加上一个AD转换接口程序-CAN Interface Module in connection analog input module that CAN module with an AD converter interface program
200604022
- CAN接口模块之模拟量输入模块编程，芯片为模数转换芯片-CAN Interface Module in connection analog input module programming, the chip for analog-digital conversion chip
741
- 基于AR和uCLinux的CAN接口电路的设计，值得一看-based on AR and uCLinux CAN interface circuit design, an eye-catcher
CAN
- 提出应采取合理设置光电隔离电路、隔离光电耦合器两侧的电源、设置必需的上拉电阻、总线阻抗匹配、增加抗干扰等措施，提高了CAN 总线接口电路的可靠性与安全性。-Should be set up to take reasonable photoelectric isolation circuit, isolation optocoupler on both sides of the power supply, set up the neces
debug_sja1000
- 测试CAN接口(sja1000) ,每接收到一帧数据,就 原样 回发 一帧!!!! (拨码开关全 拨到 ON ,上位机 发送帧 ID为 0)-CAN Test Interface (sja1000), each receive a data, on the back fat as a DIP switch !!!!( appropriated for the entire ON, host computer to send the
can-drv
- uClinux下can接口驱动程序，包含总线故障诊断及自恢复-err
CAN
- 基于51单片机系列的CAN接口C语言编程 经测试过 没有问题-Based on 51 series single-chip CAN interface C language programming have been tested there is no problem
13.6.2CANjiekou
- c语言版的CAN总线在单片机里的接口程序，CAN接口C语言编程
CAN
- TMS320F2812的CAN总线接口模块是增强的CAN接口完全支持CAN2.0B总线规范，本程序是CAN通信程序-TMS320F2812 the CAN bus interface module is an enhanced CAN-bus interface fully supports CAN2.0B norms, this procedure is CAN Communication Program
VC_Example_PCI-CAN
- VC关于DLL调用的源代码，关于界面设计，DLL调用等方面，很有参考价值。此例程针对武汉吉阳光电www.glinker.cn的GY7842 PCI-CAN总线接口卡开发，二次开发例程。-VC call on the DLL source code, with regard to interface design, DLL calls, etc., could very well refer. This routine for the w
Canbus
- CAN总线通讯例程,包含写缓冲区\读缓冲区\处理Can总线接收信息\向Can总线发送信息\Can接口芯片初始化\CanBus接口芯片产生中断[INTR0] 等程序-CAN bus communication routines, including the write buffer \ read buffer \ deal with Can-bus to receive information \ send a message to th
basic-can-project-at91sam7x-ek-keil
- JIYU AT91SAM7X256的CAN 接口协议的转换的驱动代码实现-JIYU AT91SAM7X256 CAN-interface protocol to achieve the conversion of the driver code
CAN接口与布线规范
- CAN接口与布线规范CAN interface and wiring specificationCAN interface and wiring specification(CAN interface and wiring specification)
CAN收发实验
- 实现STM32F103开发板CAN接口的通信功能。(STM32F103 development board to achieve the CAN interface communication function.)
stm32f10 CAN收发实验
- 本实验代码，可以让STM32F1的CAN工作在环回模式/普通模式下，通过KEY_UP按键切换模式。默认是环回模式，在环回模式下，按下KEY0，则可以在LCD模块上面看到自发自收的消息。如果是普通模式，那么需要两个开发板，并且用线将两个开发板的CAN接口连接起来，同时需要设置板上的P9端口连接在CAN上面，在普通模式下，按下一个开发板的KEY0，可以在另外一个开发板上看到收到的信息。(This experiment code CAN le
基于STM32的微型USB-CAN适配器开发
- 基于低成本、低功耗的STM32F103系列微处理器与高速USB2．O控制CY7C68013，设计一款微型USB—CAN适配器，解决了没有cAN接口的个人脑、特别是笔记本电脑在工控现场与CAN接口设备无法直接调试，而转换卡成本高、体积大等问题；针对点，给出了转换模块的完整设计方案；实验测试表明，该系统能以最高1Mbps的速率长时间稳定运行；文中阐述了usB—CAN转换模块的整设计方案，给出从Pc端软件到嵌入式软硬实现。(Based on
Ginkgo USB-CAN接口适配器API函数库使用说明 v1.2
- Ginkgo学会如何使用Ginkgo Usb转Can接口(Ginkgo program source for usb to can)