搜索资源列表
sbc_vivi
- 这个是广州友善之臂提供的bootloader(vivi),目标板SBC2410,支持USB下载,我试过几个网上的版本,编译出来都不支持USB,估计这个是要收费的,没办法只好用这个啦~(看到他们的公司的LOGO有点不爽)有时间可以研究一下UBOOT!-the friendliness of the Guangzhou arm of Bootloader (14:57). Target board SBC2410 support USB d
UBOOT10
- USB启动盘制作软件 市面上现在大多数U盘都支持启动机器的功,但是要制作启动型U盘,需要进入WIN98,现在很多人机器上都没有98了吧,呵呵。为了做个启动盘,装一个98,多冤啊。这个小软件就是为此编制的,在WIN2K/XP下运行,可以直接把U盘做成启动盘。程序自带了MSDOS7.1的两个 基本启动文件IO.SYS和COMMAND.COM,如果要制作复杂的启动盘,可以把其他文件拷贝到U盘上即可,比如HIMEM和CONFIG.SYS
S3C2410_UBOOT_DM9000E
- S3C2410硬件平台下的UBOOT下的DM9000E驱动-S3C2410 hardware platforms under the UBOOT driving under the DM9000E
ax88796
- 88796驱动,共享给大伙看看,给点意见-88,796 drivers, sharing the theme look to the points
UBoot(s3c44b0)
- 开发三星s3c44b0引导程序,在板子上调试成功!-Samsung s3c44b0 guide the development process, the board debugging success!
u-boot_44b0
- uboot移植到44b0开发板上的过程,doc文件,仅作为一点点参考。-44b0 uboot transplanted to the process of development boards, doc documents, as only a little bit of information.
AT91SAM9260-uboot.tar
- 基于AT91SAM9260的U-boot的源代码,支持AT91SAM9260EK开发板-AT91SAM9260 based on the U-boot to the source code, support AT91SAM9260EK development board
Nandboot-SMDK2410
- 在U_Boot-1.1.6源代码基础上修改过的可以在hfrk的SMDK2410开发板上运行的U-Boot代码.-In U_Boot-1.1.6 source code based on the modified SMDK2410 in the hfrk development board running U-Boot code.
u-boot-1.2.0
- gec2410上的u-boot-1.2.0源码,详细文档见http://blog.mcuol.com/anmnmnly/index.htm的u-boot-1.2.0移植粗解-gec2410 on the u-boot-1.2.0 source code, detailed documentation see http://blog.mcuol.com/anmnmnly/index.htm the u-boot-1.2.0 transpl
at91sam9263ek_uboot.tar
- AT91SAM9263开发板的U_BOOT源码,小弟已经在开发板上试过,可以用-AT91SAM9263 Development Board of U_BOOT source,小弟has been tried in the development of on-board can be used
GPIO
- 周立功书的实验! -Experimental Ligong Book Week! Week experiment Ligong book!
s3c2440_uboot_dev
- 三星官方S3C2440 SOC Linux下 UBOOT源代码下载。-Official Samsung S3C2440 SOC Linux source code under the UBOOT download.
2443MON_U
- S3C2443的ads boot代码,使用ARM revw2.2编译器,测试过!-S3C2443 s ads boot code, the use of ARM revw2.2 compiler, tested!
nand
- sbc2410 移植u-boot 1.3.4 的修改部分 需要在borad/sbc2410x/Makefile 下添加编译nand.o -sbc2410 transplant u-boot 1.3.4 changes borad/sbc2410x/Makefile part of the need to add compiler nand.o
arm-linux-uboot
- 嵌入式linux完全开发手册样章,详细的讲解UBOOT的移植,以及UBOOT的分析-Embedded linux fully developed manual-like chapters, in detail UBOOT transplant, as well as analysis of UBOOT
Linux_uboot
- 详细讲述了linux的移植过程 bootloader的编写 u-boot的移植过程 非常详尽的u-boot 的源码分析-Details about the bootloader process linux transplant u-boot of the preparation of the transplant process in great detail of the u-boot source code analysis
uboot
- pxa270对应的uboot程序,能够引导pxa270开发板启动-uboot corresponding pxa270 procedures, be able to guide the development board to start pxa270
nandflash
- TI公司达芬奇板卡的NAND FLASH 烧写源代码 能够自动控制UBL UBOOT UImage等文件的烧写 实现LINUX内核启动过程-TI DaVinci company NAND FLASH programmer board to the source code, such as automatic control UBL UBOOT UImage documents LINUX kernel programmer to s
ce6_dm9000_S3C6410_EVB.RAR
- S3C6410平台,WINCE6.0操作系统下,DM9000D驱动源码和说明文件-S3C6410 platform, WINCE6.0 operating system, DM9000D driver source code and documentation
uboot_for_davinci
- TI达芬奇系列的uboot源码及其移植说明,其中包括ti提供的uboot 1.1.3源码,uboot1.1.4的移植补丁及修改后生成的文件,同时附移植文档一份,可参考此文档对其他版本的uboot进行移植。-ti davinci uboot source code and related explanation.There are uboot 1.1.3 for davinci source code,and the document t