搜索资源列表
U-boot1[1].1.6的移植(TQ2440)
- U-boot1[1].1.6的移植(TQ2440)源码，适用于天嵌TQ2440开发板》
u-boot-1.1.2
- U-Boot1.1.2是最为常用的嵌入式系统Bootloader，这个版本是目前的最新版本-U-Boot1.1.2 is the most commonly used in embedded system Bootloader, this version is the latest version
u盘开发资料1
- u盘，mp3下的文件系统，完全兼容fat16，fat32，加上自己的硬盘驱动接口后应该可以使用-u disk, mp3 under the file system, fully compatible with fat16, fat32, coupled with their own hard disk drive interface should be able to use
u-boot-1.1.2.tar
- u-boot1.1.2源码，从sourceforge上下载的，最新的哦！-u-boot1.1.2 source from sourceforge download the latest Oh!
u-boot-1.1.4.tar.bz2
- u-boot-1.4.4的源代码 适合嵌入式开发的朋友。 因为后缀名不支持bz2，我在后面加上了gz。下载后重命名为bz2的后缀即可-u-boot-1.4.4 source code for embedded development friends. Because the suffix does not support bz2, I insert a gz. After downloading named for the su
uboot1.1.4.tar
- 自己修改的U-boot1.1.4For AT91RM9200DK. 请用armgcc3.3.2编译。-its own amended U-boot1.1.4For AT91RM9200DK. Please ar mgcc3.3.2 compiler.
U-BOOT_and_LINUX
- 做嵌入式开发的，bootloader一般用u-boot 。不会用？？ 那就看看这篇文章吧！~强烈推荐做嵌入式开发的看看！~-so embedded development, Bootloader general use u-boot. Not? ? Then read this article! ~ Strongly recommended the development of the Embedded done! ~
u-boot-1.1.5.tar
- U-boot1.1.5 bootloader源代码，请在GPL开源组织协议框架下使用！下载使用该源代码的用户请首先将文件名末尾的.gz扩展名改为.bz2再进行解压缩！ -U-boot1.1.5 Bootloader source code, Please GPL revenue under the fr a mework agreement to use! Download the use of the source code to u
u-boot-1.1.6
- u-boot-1.1.6加了一个avr32的支持, 与前几个版本没有什么大的改动，.-u-boot-1.1.6 adding a avr32 support Several versions with no major changes.
u-boot-1.1.6.st2410
- 调试通过的可以直接在NAND Flash 上启动的u-boot-1.1.6 (开发板：优龙st2410) 包括：cs8900网卡驱动，NAND Flash 烧写，NAND 环境变量保存（saveenv）, bootm, go, 网络下载tftpboot-debugging can be passed directly on the NAND Flash to initiate the u-boot-1.1.6 ( Plate : You
u-boot1
- 利用linux把 u-boot成功移植到 s3c44b0x上 的一点心得-use linux put u-boot successfully transplanted to the point s3c44b0x experience
u-boot
- (原创)uboot在yl2410上的移植，此u-boot代码在sdram、norflash或nandflash上都可启动运行，附详细说明文档-(Original) uboot in yl2410 the transplant, the u-boot code in the sdram, norflash or the NANDFLASH can start running on the attached detailed descr i
smdk2410-u-boot1.2.0
- 关于2410开发板的u-boot的说明，版本是1.20的，个人觉得不错，很有借鉴意义-On the 2410 development board of the u-boot that version is 1.20, and personally feel that good, useful reference
u-boot-1.1.5_atmel_1.4
- 这是uboot1.1.5的一个补丁，打上这个补丁可以使uboot支持at91sam9260的开发板。 在EBD9260-p开发板上移植u-boot1.1.5可以从ATMEL的一块demo板（at91sam9260ek）的uboot文件里修改而得。其实1.1.5的uboot并不支持ATMEL的at91sam9260ek，只支持at91rm9200ek，通过ATMEL官方提供的u-boot-1.1.5_atmel_1.4.diff.bz
u-boot
- u-boot1.2.0适用于2410开发板nand Flash-u-boot1.2.0 apply to 2410 development board nand Flash
u-boot1.1.5
- 在ATMEL公司的at91sam9200开发板上移植好的u-boot,可以直接使用.-ATMEL Corporation in the development of on-board transplant at91sam9200 good u-boot, can be used directly.
U-Boot1.3.1
- U－Boot 1.3.1修改后的源码.1马
s3c-u-boot-1.1.6_rel-4-3-2_20080917
- s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2 S3C6410X的U-BOOT源代码 20080917-s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2S3C6410X the U-BOOT source code 20080917
u-boot-1.3.0
- u-boot1.3.0的原码,从配了网络驱动和FLASH的驱动,并该用ESC竟如-u-boot1.3.0 the original code, from the allocation of a network drive and FLASH drives, and the use of ESC竟如
u-boot-1.1.6-nand
- 成功修改u-boot1.1.6,支持从nandflash启动。-Successfully modify the u-boot1.1.6, support from the nandflash start.