搜索资源列表
tx1
- 串口通信，用与两片单片机。 调试通过。
tx1
- 程序原码主要应用于工业现场来实现４８５通讯，
tx1
- 串口通信，用与两片单片机。 调试通过。-Serial communications, using two single-chip microcomputer. Debugging through.
tx1
- 程序原码主要应用于工业现场来实现４８５通讯，-Procedures for the original code is mainly used in industrial field to achieve the 485 communications,
tx1
- 利用Visual Basic实现无线通讯 -The use of Visual Basic using Visual Basic wireless communication wireless communications
RS485
- 此程序用UART1外扩MAX485实现RS-485通信，运行前将TX1和P00 短接，RX1和P01短接，当接收到一个数据后，再将接收到的数据送出。-Expand this program in use UART1 MAX485 RS-485 communication, running before the TX1 and P00 short, short RX1 and P01, then the received data whe
dulijianpan
- 在郭天祥的TX1 开发板上实现独立键盘的功能，比较简单的程序，适合单片机初学者对单片机的理解-In the Debates of the TX1 development board keyboard functions to achieve independence, a relatively simple procedure, suitable for single-chip microcontroller for beginners
TX1
- MFC开发的视屏聊天程序，里面内容都有注释说明。-MFC development of video chat program
SimulDRF1600_150911b
- Proteus 7.10. CodeWisionAVR. Simulation ZigBee module DRF1600. Implemented response packets on port FC Rx0 / Tx0. Match if FD port Rx1 / Tx1 to port Rx0 / Tx0, returns the response the port Rx0 / Tx0 to port Rx1
ADCDuringSleep
- Analog to Digital Conversion during Sleep mode example for * PIC18F46J11. * * This example samples an analog voltage RA0/AN0 taken * during Sleep mode and prints the results out to the UART * on RC6/TX1.- An
DobotDemoForSTM32
- 本 Demo 是基于 STM32F103VET6 芯片编写，因此使用本程序时需要用户自行配备一块 STM32F103VET6 开发板。（使用其他型号的芯片需要自行移植） 通讯的端口使用了机械臂扩展 10P 接口，接口的类型是 FC-10P，接口的定义如下图 7 所示。我们需要用 RX、TX、GND 这三个端口，如图 8 机械臂与开发板连接 RX->TX1， TX->RX1，GND->GND。(The Demo is b
installROS (ARM)
- 在Jetson TX1搭载的ubuntu 16.04上安装ROS kinetic(Install ROS kinetic on the Ubuntu 16.04 equipped with Jetson TX1)
深入浅出CUDA——很初步的CUDA指南
- 深入浅出介绍了nvdai公司基于TX1开发板使用的cuda编程语言(A brief introduction to the CUDA Programming language used by nvdai company based on TX1 development board)
tx1
- can driver for pic 1 series