搜索资源列表
STC-ISPdrivers
- stc-isp开发板驱动程序，运行环境Keil C-stc-isp development board driver, Keil C runtime environment
STC_keil_simulator
- 用过stc单片机的知道keil里没有stc单片机，这就是个keil中的驱动，直接安装，然后就能在 device里直接看见stc的单片机了。-SCM STC used to know there is no STC Singlechip keil, keil This is a driver of a direct installation, and then the device will be able to directly see
W25X32
- 本程序是华邦存储芯片W25X32的驱动程序，用的是STC主芯片驱动，用C语言编程，完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，已在试验板上调试过-This procedure is Winbond W25X32 driver memory chips, the main chip used is the STC-driven, with the C programming language, fu
AT45DB321D
- 本程序是FLASH存储芯片AT45DB321的驱动程序，用的是STC主芯片驱动，用C语言编程，完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，已在试验板上调试过 -This procedure is FLASH memory chips AT45DB321 driver chips with the STC main drive, with the C programming language,
ht1621
- 本程序是液晶HT1621的驱动程序，用的是STC主芯片驱动，用C语言编程，完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，已在试验板上调试过-This procedure is HT1621 LCD driver chip using the STC main drive, with the C programming language, fully portable to other 51-core
CS1241
- 本程序是24位AD采集芯片ADS1241/CS1241的驱动程序，用的是STC主芯片驱动，用C语言编程，完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，已在试验板上调试过-This program is 24-bit AD acquisition chip ADS1241/CS1241 driver chips with the STC main drive, C language programmi
FM25H20
- 本程序是铁电存储芯片FM25H20的驱动程序，用的是STC主芯片驱动，用C语言编程，完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，已在试验板上调试过-This procedure is ferroelectric memory chips FM25H20 driver chips with the STC main drive, with the C programming language, fu
STC-Keil-driver
- STC的keil驱动程序，直接安装使用。-STC' s keil driver, direct installation.
TLV5618-3
- 下面是基于STC系列单片机的TLV5618驱动程序，该程序的硬件是基于5V供电的，参考电压为2.5V，编译环境为KEIL C，已调试成功。-The following is based on the STC series single chip TLV5618 driver, the program' s hardware is based on the 5V power supply, the reference voltage
DDD112_DRV1
- USB接口芯片D12在STC单片机SCM上的驱动driver开发，定义ENDPOINT0，ENDPOINT1与ENDPOOINT2为管理通道、中断模式与批模式。压缩包中包含头文件与C文件，在keil C8.2下编译使用，，hex文件约7KB。 -The USB interface chip D12 STC SCM SCM driven driver development, the definition ENDPOINT0, END
lcd)
- 完全可移植到其他51内核单片机主芯片上，将IO口修改即可，使用的编程软件为KEIL，是STC主芯片驱动，用C语言编程，-Fully portable to the other 51 core microcontroller main chip IO port modifications, use programming software KEIL, the the STC main chip driver using the C pro
test0518
- 利用STC单片机、HKT-80BK无线数传模块以及语音报数芯片VOI9600，构建的简单对讲机，驱动代码。keil工程文件。-Use of STC microcontroller, HKT80 wireless module as well as the number of chips Voice newspaper, build a simple radio, driver code. keil project file.
hd7279a_stcprj
- hd7279a按键驱动代码。stc单片机，对keil开发环境的开发人员有帮助。代码易于移植。-HD7279A key driver code. Keil compiler to the environment familiar microcontroller developers have great reference value.The code is easy to transplant。
danpianji
- 单片机开发常用软件，包含usb转串口驱动软件，stc单片机烧录软件，KEIL C开发环境等。(SCM commonly used software development, including USB to serial port driver software, STC microcontroller burning software, KEIL C development environment.)
OV7670摄像头模块51 STC驱动(keil)
- OV7670摄像头模块51 STC驱动(keil)(Ov7670 camera module 51 STC driver (keil))