搜索资源列表
SPI_164_液晶显示
- motorola 单片机 掌握点阵字符型液晶显示(LCD)编程方法-character dot-matrix liquid crystal display (LCD) Programming
ARM上spi实现
- 使用硬件SPI接口与74HC595连接，控制74HC595驱动8个LED流水灯显示。-use of hardware and Bit SPI interface connectivity, control Bit-eight LED lights indicate water.
SPI-tx
- SPI接口实验，主机传送数据到SPI，由从机显示，IO口需要自己重新定义.-SPI interface experiment, transmission of data to the mainfr a me SPI, from the plane, IO I need to redefine themselves.
SPI
- LPC2124 SPI接口控制LED数码管显示0-F字符,同时控制4个LED显示对应的十六进制程序，包括PROTEUS仿真电路。-LPC2124 SPI interface to control LED digital tube display 0-F characters, simultaneous control of four LED display the corresponding hexadecimal procedures
LCD-SPI
- 本程序是液晶显示模块12864的驱动c语言程序，是从原厂加的工程师那里获得的，大家可以放心使用-This procedure is a liquid crystal display module 12864 driver c language program is added from the original Engineer obtained, we can be assured that the use of
LPC2131_SPI
- ucos操作系统的LPC2131调试通过的SPI显示-uCOS LPC2131 debugging the operating system through the SPI showed
SPI-bus
- 51单片机模拟spi总线，与max7221一起控制8位数码管的显示。-51 single-chip analog spi bus, max7221, together with control of 8 digital tube display.
spi
- 用软件模拟SPI的方法，实现单片机双机通信。主机用数码管显示温度，从机用1602显示温度。-SPI software simulation methods, to achieve single-chip dual-machine communication. Host digital display of temperature, from 1602 showed that the temperature machine.
PS2-SPI
- 使用SOPC软件及其配置方法，以高速12位串行AD7920实现0-3.3V的ADC转换。 PS2控制器接口模块,把键盘数据通过串口发送到电脑主机上显示哪个键被按下。-Configuration software and its use SOPC approach to high-speed 12-bit serial AD7920 to achieve 0-3.3V the ADC conversion. PS2 controlle
spi-1
- avr单片机主机发送一个数字，从机接收该数字并在led上显示-avr host send a number of single-chip, from the machine and to receive the digital led display
Display
- TMS320X2812 spi显示驱动程序，及显示部分原理图。开发环境为CCS3.1.2812SPI和74hc595通讯，驱动5位LED 数码管。一般做工程都需要有显示部分。这个可以做为公用代码，可以显示小数。已经通过测试。-TMS320X2812 spi display driver, and display portions of the schematic. Development environment for CCS3.1.2
spi
- 通过S3C2440的SPI接口,控制数码管显示不同的字符-Through the S3C2440 SPI-interface, control the digital tube display different characters
PIC-SPI
- PIC16F877A进行SPI通讯，将数据发送给25C040，同时显示从25C040读出的数据-PIC16F877A for SPI communication, the data sent to the 25C040, also shows the data read out from the 25C040
spi-led-display
- 基于单片机dspic30f6010a的spi串口控制四个八位数码管显示的c程序，已调试好了。-The spi serial which is based on dspic30f6010a control four of eight digital display c program, have a good debugging.
spi-ad
- 基于atmega16和spi adc mcp3001的读操作，在avrstudio中构建程序，在proteus中仿真显示。-Based on atmega16 and spi adc mcp3001 reads, in avrstudio build process, the simulation shows in proteus.
UART.X
- 利用串口与上位机通信，实时采集电信号并显示，最后以通信的方式返还给上位机。(Using serial port to communicate with the host computer, real-time acquisition of electrical signals and display, and finally return to the host computer by means of communication.)
SPI液晶显示
- stm32f407屏幕网格绘制通过SPI接口在外接屏幕绘制表格(Stm32f407 screen mesh rendering)
5.OLED延伸——界面（显示MPU6050数据）
- STM32驱动显示六角OLED，SPI法，附带一个已经编辑完成的界面（带4个按键）(The STM32 driver displays six corners, OLED, with SPI, with an edited interface (with 4 buttons))
天马4线SPI-LCD彩屏
- 驱动天马液晶屏幕用程序，可以实现天马彩色TFT屏幕的显示功能(Using for TianMa TFT.)
spi
- 利用AD接收滑动变阻器的值，并将其利用spi显示在数码管上(The value of the sliding rheostat is received by AD and displayed on the nixie tube by means of SPI)