搜索资源列表
DL IMU 测试程序
- 这是我从淘宝买的一套IMU（姿态测量单元）学习套件的配套源码，使用STM32F103CBT6 读取L3G4200D hmc5883l ADXL345 BMP085的数据并通过串口发送
bmp085
- 气压传感器BMP085开发的源代码，以I2C通信协议为基础，适合与气压与温度的测定-Pressure sensor BMP085 developed source code to I2C communication protocol, suitable for the determination of the temperature and pressure
digital_psensor
- I2C Interface for BMP085 Pressure Sensor Sampling Firmware
BMP085Code
- while(1) { BMP085_sample(3) temperature=T pressure=p temperature=temperature/10 //单位：摄氏度 pressure=pressure/1000 //单位：kPa delay(100) //这里就可以调用显示程序，驱动LED或者LCM显示结果了 }-BMP085 code
BMP085ExampleCode
- BMP085 Test Code April 7, 2010 by: Jim Lindblom Test code for the BMP085 Barometric Pressure Sensor. We ll first read all the calibration values from the sensor. Then the pressure and temperature readi
BMP085
- BMP085的技术文档，是开发BMP085所必须的资料-BMP085 technical documentation, is the development of the information necessary BMP085
BMP085
- 使用LABVIEW8.5编写对BMP085的温度和压强的读出。-Prepared using LABVIEW8.5 BMP085 temperature and pressure on the readout.
zuixinxiugai
- bmp085传感器驱动程序，主要使用了I2C通信协议-bmp sensor driver
bmp085
- bmp085 pressure sensor routines for ATMEL uP in Bascom
bmp085
- 温度压力传感器，bmp085 完整简洁程序，采用c语言编写的头文件-Temperature and pressure sensors, bmp085 complete simple procedures, using c language header file
BMP085
- bmp085的读取，并在lcd上显示的代码(已验证)-Code of bmp085 temperature and pressure read out and display on the lcd
bmp085_lcd
- bmp085的读取，并在lcd上显示成功-Code of bmp085 temperature and pressure read out and display on the lcd
STC51-BMP085
- BMP085 IIC测试程序 使用单片机STC89C51 晶振：11.0592M 显示：LCD1602 编译环境 Keil uVision2-BMP085 IIC test program using SCM STC89C51 crystal: 11.0592M display: LCD1602 build environment Keil uVision2
BMP085
- BMP085气压传感器在单片机STC89C5的测试程序，使用 IIC协议。由1602显示。-The BMP085 pressure sensor the microcontroller STC89C5 the test procedure, the use of the IIC protocol. From the 1602 show.
BMP085
- BMP085气压模块资料 原理图和 8051程序-BMP085 pneumatic module information the schematic and the 8051 program
BMP085
- 用于检测大气的气压 ，用的是BMP085芯片-Pressure measurement
bmp085
- 基于bmp085气压高度计测高度程序 可选用stc单片机和c51单片机-bmp085 for calculating height
BOSH-bmp085-driver
- BOSH BMP085单片机读写数据程序-To BOSH BMP085 microcontroller to read and write data program
STC51-BMP085
- stc51单片机开发环境编写的程序，采集传感器BMP085的温度及压强，同时可计算海拔高度-stc51 microcontroller development environment written procedures, collecting sensor the BMP085 of temperature and pressure, and altitude can be calculated at the same time
STC51-BMP085 LCD1602测试程序
- BMP085 IIC测试程序 使用单片机STC89C51 晶振：11.0592M 显示：LCD1602 编译环境 Keil uVision2(BMP085 IIC test program Using the microcontroller STC89C51 Crystal: 11.0592M Display: LCD1602 Compile the environment Keil uVision2)