搜索资源列表
ad
- 基于ATmegal16的AD转换的程序，并把转换后的数据，实时通过LCD显示出来，上面有把变量的值转为字符并显示出来的子程序
ad采样显示
- msp430的片内ADC对P6.0端口的电压进行转换 将模拟电压值显示在1602液晶上。 本程序已经得到测试，完全正确。
AD转换及显示
- A/转换程序，用在8051或8031，此外还有两个小的显示的程序-A/switching procedures used in 8051 or 8031, in addition to two small display procedures
模数数模转换器的使用的程序原代码
- 涉及指示灯驱动管脚,蜂鸣器驱动管脚定义,AD的状态显示,AD的选中信号,延迟子程序-involving light-pin, buzzer-pin definition, the state AD, AD selected signal delay subroutine
987654321
- 本压缩包包含1602液晶显示，键盘显示，AD转换，非常好的电子种程序，都是我发了好多时间收集的！-contains the compressed 1602 LCD, keyboard, the AD converter, very good kinds of electronic procedures that I made a lot of time to collect!
电流电压表
- 本程序主要完成对外界输入的电流/电压进行AD转换并显示的功能-the procedures for the major external input current/voltage AD conversion and display functions
app_ADC_with_digit_8_led_by_kkyou
- 电压计(c语言编写的) 通过led灯显示 电路图说明： 1、R1、R2、D1、D2 组成发光二极管显示，显示过压或过流状态； 2、PC3外接模拟信号 采用内部参考电压所以AREF传电容接地抗干扰AVCC接VCC提供AD转换电压 3、PC5提供164的时钟信号 PC4提供串行输入信号 164具有10ma的输出电流，又具有串入并出以及信号锁存的动能，数码管又为共阴管，所以无须另加驱动 这
ad
- 基于ATmegal16的AD转换的程序，并把转换后的数据，实时通过LCD显示出来，上面有把变量的值转为字符并显示出来的子程序-ATmegal16 based on the AD conversion process and data conversion, real-time through the LCD display above the variable
AD
- 51单片机的AD程序，读取AD转换的值，并用LED显示-51 MCU AD procedures, read the AD conversion value, and LED display
msp430demo
- msp430测试程序，可实现LED显示，AD转换等功能 -MSP430 test procedure can be realized LED display, AD conversion function
msp430program
- msp430f449功能模块的程序，程序都是自己调试过的，包括了大部分功能。ad转换，定时器，led显示，比较器，uart等-MSP430F449 function module procedures, procedures have their own debugging, including the majority of functionality. ad conversion, timer, led display, compa
adzhuanhuanchengxu
- 左边输入,八位显示外部译码八位显示。AD转换程序 -The left input, eight showed external decoding of eight shows. AD conversion process
ad-test
- PIC18F6390的AD转换程序 转换结果用LCD显示-PIC18F6390 the AD conversion results of the conversion process with LCD display
AD
- TLC549的A/D转换程序，读取模拟输入量的值，并将其显示在LED显示器上,附有详细的电路说明和解释，包括c和汇编-TLC549 the A/D conversion process, read the value of analog input and displays in the LED display, accompanied by a detailed descr iption and explanation of the
2
- ad转换程序，所使用的单片机为MPS430，8通道，采样AD通道的电压，并将其度出来显示-ad conversion process, the use of single-chip for MPS430, 8-channel, voltage-channel AD sampling and display degrees out
AD
- STC单片机AD转换程序并能在数码管上显示，采样电压为0-10V转化成0-100或0-150在数码管上输出-STC Single-chip AD conversion
c8051f040-ad
- C8051F040的AD转换程序，检测CPU的温度并实时显示-C8051F040 the AD conversion process to detect the temperature of CPU and real-time display
PICC
- pic 单片机 AD转换显示到千位的程序LCD用 ad转换c语言PICC显示到千位-pic microcontroller to 1000 AD conversion shows the procedure to use LCD display ad conversion c language into the 1000 PICC
stc12c5a60s2 内置ad转换程序加数码管显示
- stc12c5a60s2 内置ad转换程序加数码管显示 准确(STC12C5A60S2 built-in AD conversion program, plus digital tube display accurately)
AD转换-基于IAP15 - LCD显示
- keil 软件开发 传感器系统 AD转换显示程序(this is a program about data acquisition .program was finished with keil v4 ide and run on soc iap15f2k61s2.)