搜索资源列表
595
- 呕心沥血,74HC595 5片级联程序,已经在我的板子上应用-the program is about 74hc595 more conect
595soft
- 两片74HC595级联实现8位7段LED动态显示的驱动测试程序-74HC595 cascade realization of 2 8 7 LED dynamic display driver testing procedures
74HC595_led
- 两片74HC595级联,形成16位并行数据输出。控制8个数码管显示。显示刷新周期为2ms。 单片机只需3个I/O口发送串行数据到74HC595即可。程序用c51编写。-74HC595 2 cascade, the formation of 16-bit parallel data output. Control of 8 digital tube display. Display refresh cycle for 2ms. Onl
Electropneumatictesttooling
- 用于做电容可调用的工装程序,完整的代码,内部有级联8片的74HC595驱动与SMG12232驱动。再就是程序的高效率方式-Capacitor can be used to make calls tooling process, the complete code, within the cascade 8 of 74HC595 drive and SMG12232 drive. And then there are procedures
595
- 74HC595级联使用通过板子的测试,请放心使用-74HC595 cascade through the board using the test, please be assured! ! ! ! ! ! ! ! ! !
1111
- 4个74HC595级联数码管显示,使用模拟SPI时序-4 74HC595 cascading digital display, using the SPI timing simulation
111111
- 通过仿真软件Protues,实现1632点阵的汉字显示控制,行扫描用74HC154,用4个74HC595级联送数据,附有源程序及仿真电路。-The simulation software Protues, to achieve the 1632 dot matrix display control characters, line scan with a 74HC154, 74HC595 with four cascaded to se
74HC595
- 74HC595,74HC138级联仿真实现万年历,温度,农历显示-74HC595, 74HC138 cascading Simulation calendar, temperature, Lunar display
two74595
- 这是用两片74HC595级联的方式驱动一个四位的数码管,第一片驱动DUAN,另一片驱动位,数码管采用共阴数码管.-This is a four way driver with two 74HC595 cascading digital tube, the first piece of drive DUAN, another piece drive, digital tube were overcast digital tube.
2
- 16*16点阵2片74hc595级联msp430控制显示-16* 16 dot matrix 2 74hc595 cascade the msp430 control display
74HC595
- 74hc595驱动显示不同内容的LED的程序,多个595级联-74hc595 drive the LED display different content program, the plurality 595 cascaded
74hc595
- 51单片机 使用两片74HC595芯片控制发光二级管级联程序-51 MCU using the two 74HC595 chip to control light-emitting diode cascade program
74HC595
- 在做一个项目应用时,使用的I/O较多,应用到了74595来做扩展,但是若要挂接多片74595,势必也要多用到I/O口,为了解决这个问题,我将每2片74595做级联,然后再将级联之后的所有时钟线与数据再并联在一起(即所有的74595共用时钟与数据线,故只占用2个I/O口线),最后对每一组的锁存控制线做单独控制(在这里也相当于片选了),这样一来硬件电路得到了很大程度的简化,同时在程序上也可以共用一个74595的驱动子程序,控制不同的锁存控制
dianzizhongV1.0
- 基于stc11系列单片机的电子钟,用多个74HC595级联,有多个数码管显示时间,60个led灯显示秒灯,含按键调整、闹钟等功能。-Based stc11 series single-chip electronic bell, with multiple 74HC595 cascade, there are multiple digital tube display time, 60 seconds, lights led lights
595LED-clock
- 用48个LED通过74HC595级联来显示DS1302的时间,并附有proteus仿真图。-With 48 LED 74HC595 cascade through time to show the DS1302, together with proteus simulation map.
74HC595_Cascade
- 这是一个关于74HC595级联的很好的例子,并带有protues仿真,是基于avr M16的平台开发,并带有本人的调试经验和详细的注释,特别适合刚开始使用595的朋友,大家赶紧下载吧!-This is a good example of 74HC595 cascade, and with protues simulation is based on the platform avr M16, and with the debugging
74HC595-ASM-DRIVER
- 51单片机汇编语言三线驱动五片级联的74HC595,带proteus7.1仿真,但是在Proteus7.7不知为何仿真不出来595端口状态-51 DRIVER 74HC595 ASM CODE
7HC595-4--7seg
- 4个74hc595级联驱动4个数码管进行显示的代码- 4 74hc595 cascade drive 4 digital tube display code
74HC595(N)
- 网上关于595的级联参考很多,但真正做到N个级联的都没,而且他们几乎都忽略了,OE使能输出,本程序实现50个595的级联,希望对大家有帮助-c keil 74hc595
74HC595流水灯
- 单片机控制74hc595做跑马灯,流水灯,可以级联(SCM control 74HC595 marquee, water lights, can be cascaded)