搜索资源列表
165
- 两片74hc165级联的驱动，用protues 7.1仿真 c语言-two 74hc165 cascade driven by protues 7.1 simulation language c
74HC183
- 此程序位单片机应用程序，主要是控制74HC183-This process-bit single-chip applications, mainly controlling 74HC183
HC164
- 用verilog写的HC164的驱动程序，参考了Xilinx的经典算法，做了一点改进~~~很通用，是初学verilog以及FPGA开发很有用的一个程序！
74HC165_Key
- 通过74HC166采集按键信号，读取按键值的程序。-74HC166 collected through key signal, read the key value of the procedure.
74HC164
- 很好的元件应用说明,白色家电的显示要求相对较低,采用通用芯片74HC164替代专用显示驱动芯 片,既可获得相同显示效果,又可降低成本,提高系统可靠性.-Good components application notes, white goods display requirements are relatively low, the use of generic substitutes 74HC164 chip dedicated
74HC116
- January 1988 MM54HC00/MM74HC00 Quad 2-Input NAND Gate General Descr iption These NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power
74hc138
- 74ls138 基于verilog语言的实现 -Verilog language 74ls138 based on the realization of
74HC161
- 74ls161 基于verilog语言的实现 源程序在压缩包的hdl文件夹中-74ls161 language based on the realization of verilog source package in compressed folder hdl
74hc164
- 74HCT164 是 8 位边沿触发式移位寄存器，串行输入数据，然后并行输出。数据通过两个输入端（DSA 或 DSB）之一串行输入；任一输入端可以用作高电平使能端，控制另一输入端的数据输入。两个输入端或者连接在一起，或者把不用的输入端接高电平，一定不要悬空。-74HCT164 is an 8-bit edge triggered shift register, serial input data, and then output in
LED
- 基于ARM7的点阵显示程序，用串入并出74HC164来传送数据，节省I/O口-ARM7-based dot-matrix display program with string into and out of 74HC164 to transmit data, saving I/O port
74HC165
- 通过本例程了解74HC165（并入串出） 的基本原理和使用-Through this routine about 74HC165 (incorporated into the series a) the basic principles and use of
Verilog74HCxxx
- 文档为用verilog编写的若干74hc系列器件的HDL实现。包括：74HC85、74HC74、74HC138、74HC151、74HC161、74HC194、74HC373、74HC283、74HC4017等-Documents prepared for the use of verilog series devices HDL certain 74hc implementation. Including: 74HC85, 74HC7
74HC14N
- 整形放大器件的详细说明文档，欢迎大家下载学习-Shaping amplifier parts detailed documentation
74hc165
- 2个74HC165级联，控制16个按键并且用LED显示哪个按键按下-2 74HC165 cascade, control 16 keys and press the button with a LED display which
74hc165
- 本例子是用硬件SPI接口循环发送一个变量到74HC595，并且在数据发送完毕后通过单片机的另外一个IO接口PB2输出一个“锁存”脉冲 ，使74HC595把移位寄存器的数据输出到锁存寄存器,并驱动8个LED输出，实现来回流水的效果。-This example is using the hardware SPI interface to send a variable to the loop 74HC595, and after the d