搜索资源列表
hfrk 2410 横屏驱动程序
- hfrk 2410 横屏驱动程序，已经成功运行
VxWorks设备驱动编写和移植指南
- VxWorks设备驱动编写和移植指南-VxWorks device drivers and the preparation of guidelines for transplant
h2410系列usb驱动
- 嵌入式系统的USB驱动(S3C2410)-Embedded Systems USB drive (S3C2410)
如何添加串口2和串口3的驱动_by kingmokey
- 一个串口驱动开发教程，对初学者很有帮助，欢迎下载-a good tutorial of linux serial port driver
s3c2410液晶屏驱动
- 三星s3c2410芯片的linux系统下的液晶屏驱动-s3c2410 Samsung chips linux system under the LCD driver
s3c2410.h_chip.H
- s3c2410内部ADC转换的驱动程序，在arm2410实验板上测试过。-s3c2410 internal ADC conversion of the driver, the board arm2410 experiment tested.
zy-usb_camera
- 致远公司2410开发板的USB摄像头（OV511）模块驱动及应用-2410 development board TOWIN company s USB camera (OV511) drivers and application modules
iic_driver
- IIC的驱动程序,平台是基于s3c2410的. 并做了EEPROM的一个测试程序 -IIC of the driver, s3c2410 platform is based on the. the EEPROM and do a test procedure
linuxpara
- 一个基于s3c2410嵌入式系统的并口实验（包括驱动程序和测试程序）-s3c2410 an embedded system based on the parallel experiments (including drivers and test procedures)
linux2_6
- 有关s3c2410TFT的液晶驱动原理 -the s3c2410TFT LCD driving principle of the LCD driver s3c2410TFT Principle
ARMS3C2410TFT-LCD
- ARM芯片S3C2410驱动TFT-LCD的研究-S3C2410 ARM chip TFT-LCD Driver Study
s3c2410test_r11
- 三星2410 硬件功能测试程序，包括LCD,声卡1341等，对于编写底层驱动有很大帮助作用。-hardware testing procedures, including LCD, Sound Card 1341. Drivers prepare for the bottom are very helpful role.
btn_drv
- 这份源码是用基于QT2410的嵌入式Linux开发的按键驱动程序以及测试程序.-this source is based on the QT2410 Embedded Linux Development Button and test driver procedures.
keyboard_LED
- 2410开发板上键盘与LED的驱动实验，采用ZLG7290芯片-2410 development board keyboard and LED Drivers experiments using ZLG7290 Chip
mmc_samsung
- 三星公司ARM芯片S3C2410 SD/MMC LINUX 驱动程序源码。-Samsung S3C2410 ARM chip SD/MMC Linux driver source.
wince2410ad
- wince 4.2 下s3c2410 ad 的驱动代码 一般的2410 bsp里没有 ad 的驱动-wince 4.2 s3c2410 ad under the driver of the 2410 general code bsp Lane no ad drive
linux11_mig1_11release
- 关于嵌入式s3c2410开发平台上linux2.6内核移植以及其驱动程序开发的讲解文档,讲叙的十分清楚,是难得的好文章!-s3c2410 on embedded development platform linux2.6 kernel transplantation and its driver on the development of the document, spoke of the very clearly, it was r
kaidri4
- 这是一个基于s3c2410的驱动，通过16位总线arm取CPLD得到的数据-based s3c2410 driven by 16 bus arm from the data obtained from the CPLD
2410-fs-ldqmoon
- 这个是我调通的在2410下运行文件系统的程序. 用2410驱动sd卡来实现fat文件系统. 欢迎大家来测试. 用法很简单, 如下 FILE *fp // 文件指针 unsigned char temp[24]="3.wav" // 文件明需要放在数组里 while(!initialize_media()) // 初始化sd卡 { Uart_Printf("sd initializin
DMC2410C+V1.0
- 4轴运动卡2410驱动程序，程序实例，以及DLL库(4-Axis Motion Card 2410 Driver, Program Example and DLL Library)