搜索资源列表
slsnif-0[1].4.2.tar
- 项目描述: slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions. Serial line sniffer是一个串行端口记录工具。它监听指定的串行端口并记录所有通过这个端口的两个方向的数据。 来源：http:/
Myrece3.0
- F206串口收发程序,内含16进制和字符数据的相互转换-F206 serial transceivers procedures, containing 16 characters in hex and data conversion
serial——2005
- 串口通讯程序，用VC++做，可以传输大文件-the program of communication of serial port,which is programmed with the tool of VC++ and can transfer big files.
linux serial program demo
- linux下串口通讯源程序，可以作为两机通信-source program about serial communication in linux,and can used in communication between two terminals.
serial IO
- tcl编写的串口API，包括发送命令，以及读取串口命令。-Serial port IO API coding with tcl. Include write and read data from serial IO port.
显示0到F
- 利用串行驱动数码显示每位从0显示到F，到灭循环显示，要求1秒更新一次。-drive using serial digital display shows each from 0 to F, to eliminate cycle, a request updated seconds.
通过串口关闭Linux服务器-sled-0.1.tar
- linux下通过串口关闭Linux服务器的串口通讯程序 C语言源程序 sled-0.1.tar.gz-Serial closed through the Linux server serial communication procedures C language source sled-0.1.tar.gz
CMPPClient1.0
- 使用at指令发送的代码 使用标准AT指令 现在只能支持PDU模式（Text模式太简陋）！ 支持7_Bit 和 UCS2 编码 集成了串口（spcomm） 只需要简单的配置几个参数就可以收发短信了-use of this directive at the code using standard AT command now only support PDU mode (Text mode - too shabby)!
new__arm7_armboot-1.1.0
- 多种Arm7/9单片机的 的嵌入式系统UCOS代码，具有RS232串口，TCP/IP网络，TFTP, USB接口代码，非常完整-variety of Arm7 / 9 MCU embedded systems UCOS code, with RS232 serial port, TCP / IP network, TFTP, USB interface code, a very complete
rt_com-0.5.5.tar
- A real-time serial port device driver, works with RT-Linux and RTAI. -A real-time serial port device driver. works with RT-Linux and RTAI.
LCD_DEMO-1
- lcddemo-1（2004版） -- 320X240 STN 灰度LCD 测试 此代码在SDT2.51下调试通过。运行时LED会闪烁一下，接着串口0会输出一些系统信息,在波特率为57600超级终端可看到,打印出来的由ASCII字符组成的 FS44B0X图样，此时LCD上显示ascii字符组成的ARM图样。通过串口终端与系统交互，可以测试320X240 STN LCD,包括图形显示函数，ascii字符显示函数。 -lcddem
C51-serial-console--Csc-v1.0
- 我自个写的一个\"C51串口控制台\" 目的是可以像用DOS一样命令单片机 正在努力完善-months since I wrote of a "C51 serial console" the purpose was to be the same as using DOS command SCM is working to perfect
Insight_44B0X_BIOSV1.0
- 三星44B0的BOOTLOADER，ADS项目文件，带网络数据传输，带串口打印-Samsung 44B0 of BOOTLOADER, ADS project document with data transmission network, with Serial Print
Lab542-Serial
- 这是一个串口测试程序，用它可以检查串口是否工作正常-This is a serial testing procedures used to check whether the serial normal work
serial.c
- 这是一个串口编程的入门程序，里面还附带有一个word文档的详细介绍，希望能有所帮助-This is a serial programming entry procedures, which also has an attached word document in detail, hope can be helped
uccom1
- arm入门例子程序，这是我根据串口0改的使用串口1的程序源码。-arm entry procedures, which is under serial 0 Serial change the use of a procedure source.
sxd
- Keil uVision2下，串口模式0串行移位输出，与74LS164配合点亮7段数码管-Keil uVision2, strings together the mouth pattern 0 serial shifting outputs, lightens 7 sections of digital tubes with the 74LS164 coordination
Serial Programming Guide for POSIX Operating Syste
- describle how to develop serial program in posix
secom-0.9
- Linux下常用的串口函数库，可简化开发。-Linux common serial functions will simplify development.
serial-5.05.tar
- 8250/16550串口芯片在Linux下的驱动（Ver5.5）-8250/16550 serial chip in the drive Linux (Ver5.5)