搜索资源列表
dianzi_clock
- 程序及操作指南：程序写入上电后，将在四个数码管上显示0000，然后每隔一分钟，数码管将从低位跳变，该程序模拟的就是时钟。用按键数显键可将时间调至正确时间。-procedures and operational guidelines : procedure into power, in possession of four digital display on the 0000, then every one minute of digi
P89LPC932_Pulse
- 对一方波的每一次电平跳变进行捕获，并用捕获值计算方波的脉冲宽度，占空比，周期或其他。-right side of every wave-hopping-- for capture, and capture value with the square wave pulse width and duty cycle. cycle or other.
qixianchufaqi
- 当按下报警按钮时，单片机开始检测过零点，过零点的负跳变（T2EX）引发定时器2中断后,定时器2开始定时，当定时器2定时时间到，则单片机发触发脉冲，并且同时定时器0开始定时1ms，1ms时间到则停止发脉冲，每个脉冲的工作时序如图4-1所示。工频交流电率为50Hz，过零点每个周期(20ms)检测一次，因此，1秒内共检测过零点50次。单片机发脉冲6000次后（2分钟），自动停止发脉冲。 如果需要硬件电路与详细说明文档请与作者联系！可免费提
LED
- LED控制器程序，可实现渐变，跳变功能！-LED controller procedures, can be realized gradually, hopping function!
LPD6803-light
- 本程序使用STC单片机控制LPD6803驱动LED全彩灯具产生各式变化，用于亮化等场合，变化包括跳变、渐变、跑马、追尾等亮化常规模式，程序内部有详细的注释，主要读者稍加修改即可用于自己的电子产品中。-This procedure to control the use of STC Singlechip LPD6803 driven full-color LED lamps produce all kinds of change, for
demo1
- 会变颜色的屏幕 整个屏幕都会变 五颜六色 跳变-Change the color of the screen the entire screen will change colors hopping
PWM
- 基于51单片机，用延时实现led渐渐变亮再变暗-Based on 51 single-chip, the delay led to achieve gradually darken brighten again
LEDqicaidengtqdccs
- LED灯条程序，适应LED灯条，灯带，有七彩变化，渐变，跳变等！-Article procedures LED lights, LED light adaptation, the light zone, there is color change, gradual change, jump and so on!
spwm6
- 这是个SPWM的六路输出程序，采用的是规则对称算法，虽然改变了占空比，但波形不对。现对程序的几点说明如何，其中K的初值，我设置的是1，因为我采用的是下益中断，这样的话程序在发生第一次中断之前已经进行了两次跳变（两次和比较寄存器匹配）。这个程序输出的波形通过低通滤波器之后出来的不是个正玄波，希望高手们能给分析一下，以下是我的邮箱liuhao511zz@sina.com.cn-spwm
Guardrailusefulprocedures
- 护栏管用程序，用于外部控制，可实现渐变，流水，跳变等效果。-Guardrail useful procedures for the external control can be realized gradient, flowing water, jump, etc. effects.
capture_intrput
- 基于msp430的液体滴速检测，当有液滴流经时，可以通过IO的跳变捕获次脉冲-Msp430-based liquid Disu testing, when there are droplets flowing through, you can jump through the IO' s capture pulses
test6803
- 6803控制led跳变，最简单应用6803的控制程序。-6803 control led transition, the most simple application of the control program 6803.
16v1
- 一个非常实用的LED护栏管DM134七彩跳变控制程序拿出来和大家一起分享，好用的话发条短信谢我就行啥-A very useful LED guardrail tube DM134 control procedures colorful jump out to share with everyone, easy to use SMS, then thank me on the line winding Sha
51_6803Test
- 51单片机+LPD6803驱动芯片控制LED护栏管源程序，只是简单的跳变和渐变。-51 MCU+ LPD6803 driver chip to control LED fence tube source, just a simple and gradual transition.
508
- PIC12C508写的LED灯跳变程序！是C语言写的！-PIC12C508 written procedures LED lights jump! Is written in C language!
hwx
- C8051F020，PCA捕捉红外脉冲跳变沿，获得脉宽，通过串口将其上传到上位机-C8051F020, PCA capture the infrared pulse edges, access width, through the serial port to upload to PC
digital-transition
- 自己编译的数码管循环点亮并变数字，但是有几个不好的地方：数码管跳变有问题，数字却很正确的。-Compiled their own light and variable digital control loop number, but there are several good places: a problem digital transition, digital is very correct.
单键控制七彩跳变-义隆单片机汇编程序
- 义隆单片机单键控制七彩跳变汇编程序，按一下开关改一种色彩，在断电时保持上一状态。(Elan microcontroller control colorful jump assembler, press the switch to change a color, keep a state in power.)
程序
- 供研究跳变神经网络的研究人员参考使用，工具箱为LMI(The procedure is for researchers who study jumping-off neural networks and the toolbox is LMI.)
蛙跳算法
- 蛙跳算法，基于蛙跳算法实现优化变分模态分解的K和a.(Frog jump algorithm, based on the frog jump algorithm to achieve optimal variational mode decomposition K and A.)