搜索资源列表
WinCE下的触控屏驱动程序源代码
- 用evc编写的WindowsCE.net的触控屏驱动程序源代码-tangible screen driver source code in wince system
9351301
- WinCE下的触控屏驱动程序源代码 ,可用-WinCE under the procedures of touch-screen source code available
TOUCH_CE
- Windows CE下的触控屏驱动程序源代码-Windows CE tablet screen driver source code
WinCE下的触控屏驱动程序源代码
- 用evc编写的WindowsCE.net的触控屏驱动程序源代码-tangible screen driver source code in wince system
9351301
- WinCE下的触控屏驱动程序源代码 ,可用-WinCE under the procedures of touch-screen source code available
TOUCH_CE
- Windows CE下的触控屏驱动程序源代码-Windows CE tablet screen driver source code
touch
- windows ce 下的触控屏驱动程序源代码-under windows ce touch screen driver source code
WinCE_touch
- WinCE下的触控屏驱动程序源代码 -WinCE under the touch screen driver source code
FS2410TS
- FS2410开发板点触屏驱动原码，调试成功！-FS2410-point touch screen driver development board the original code, debugging success!
Touch_LCD
- 3.2寸触屏驱动程序 加了注释 自己试了还可以-3.2-inch touch screen driver, added a note of his trial can also be
backlight_ctl
- 《背光控制程序》 根据Tiny6410厂家提供的内核源码中的触屏驱动（路径：drivers/input/touchscreen/mini6410_1wire_host.c），背光由设备</dev/backlight-1wire>控制，该设备提供了write方法，根据用户传入的亮度值（0 ~ 127）来设置背光。 程序由操作函数<backlight_ctl.c> ，头文件<back
Touch-XPT2046-
- 基于STM32的触屏驱动代码，spi的接口-based on the pretext of the STM32 the touchscreen driver code, spi Interface
Touch
- stm32F4 控制5寸液晶触屏驱动程序-Stm32F4 control 5 inches of liquid crystal touch screen driver
Touchscreen
- 电阻触屏驱动四线电阻触摸屏代码，代码比较简单，调用有几个函数即可-Resistive touch screen drive four-wire resistive touch screen code, the code is relatively simple, the call has several functions can be
port-linux
- 我自己在arm9平台上移植linux2.6.3内核以及文件系统和触屏驱动的方法总结 绝对自己原创 我自己写的 有些经验很实用 -linux port
GT9XX_V2.2_for_Android
- 移植Android的GT9XX触屏驱动的参考资料，其中包括移植的说明，参考驱动程序，以及相关的datasheet。-GT9XX for Android-driven migration instructions and reference drivers, as well as the capacitive touch chip GT910 Datasheet.
GT9xx tp_driver
- 联发科触摸屏gt9xx，系列驱动开发文件(MTK gt9xx tcp driver)
gt9147
- gt9147电容式触屏驱动，支持多点触控方式，最多支持5点同时触摸(gt9147 cap-touch driver)
GT9113
- 标准触摸屏驱动编写实例,本例为实际调试通过的一个标准触屏驱动框架，例外附上数据手册。(Preparation of standard touch screen driver instance, in this case a standard touch-driven fr a mework for the actual debugging, exceptions attached data sheet.)
激光控制电路2
- 通过并口转8位模拟，经过三极管放大驱动激光管，并监控电压电流和激光管pd脚反馈信息，可通过2.8寸屏幕控制，仅供学习使用不可商用，有不足之处望指出互相学习。(Through parallel port to 8-bit simulation, the laser tube is driven by triode amplification, and the voltage, current and PD pin feedback inf