搜索资源列表
步进电机转数测定
- 步进电机转数测定 步进电机转数测定
单片机控制步进电机正反转
- 单片机控制步进电机正转反转加速减速
步进电机控制8255
- 是实验操作过程的详细讲解,有源程序即控制:转,停;正,反;快,慢;-experimental operation is the detailed talks, a source that is control : turn and stop; Now, anti-; Fast, slow;
stepper_motor_controller
- 步进电机控制程序,用51单片机控制步进电机的运转,可实现电机的正转、反转、归零、自动速度调解,4x4键盘扫描输入需要电机转动的相位,6为数码管显示当前的角度等功能。单片机程序用C51编写。-stepper motor control procedures, with 51 MCU control of the stepper motor operation, the motor is transferred, inversion, ze
zhengzhuan
- 这个是用汇编语言编制的一个程序来实现步进电机的正转和反转-this is a compilation of language procedures to achieve a stepper motor is transferred and the reversal
diandongji
- 步进电机控制程序p3.2正转,p3.3反转,p3.4停止-stepper motor control procedures is to p3.2, p3.3 inversion, p3.4 stop
stepmotor111
- 步进电机的控制程序。用来控制步进电机的正转,反转,加速,减速-stepper motor control procedures. Used to control the stepping motor is changed, and inverted, acceleration, deceleration
abcdddddddd
- 8255如何用8255和拨动开关控制控制步进电机的正转和逆转-8255 using 8255 and pull off control of the stepper motor control is transferred and reversed
步进电机控制,LCD显示
- 利用C51对步进电机进行控制,可以加,减速,正转反转,LCD显示步进电机实时状态,当速度达到一定值时,警报器报警。(Using C51 to control the stepper motor, you can add, slow, positive reverse, LCD shows the real-time status of stepper motor, when the speed reaches a certain val
正反转可控的步进电机
- 控制步进电机正反转,正转3圈,反转3圈,停止(Control stepper motor positive and negative)
按钮控制步进电机转角
- 可以用按钮操作步进电机做正转 反转 转一定角度等等(Buttons can be used to operate the stepper motor to do positive, reverse, turn to a certain angle, and so on)
步进电机控制
- 步进电机控制,可控制正转反转,还可以控制旋转速度(Stepper motor control, you can control the forward, reverse, but also to control the rotation speed)
电机精确控制
- 用stm32精确控制步进电机所转角度,保证其精度(STM32 precisely controls the angle of the stepper motor)
82-步进电机转动原理
- 82-步进电机转动原理(Rotating principle of 82- stepping motor)
85-步进电机转速数码管显示
- 85-步进电机转速数码管显示(85- stepper motor speed digital display)
单片机固定角度调速
- 单片机控制步进电机转固定角度和调速速度控制(Single chip microcomputer control not only the fixed angle and speed regulation of the motor)
完整通信好使电机转 - TM3 -
- 1.基于STM32利用DRV871驱动步进电机 2.配置SPI使STM32和DRV871通信控制步进电机 3.配置PWM控制DRV871的Step来控制步进电机的转速(1. using DRV871 to drive the stepper motor based on STM32 2. configuration SPI makes STM32 and DRV871 communication control step moto
步进电机按键正反转
- STC89C51普通的两极步进电机,一路PWM 一路换向,按键操控正转反转(Ordinary two pole stepping motor, PWM all the way change direction, key manipulation is turning reversal)
2.步进电机(按角度)
- 步进电机 1. 实现的功能:控制电机转某一确定的角度,比如输入任何一个为1.8度的倍数的数值,控制电机转动相应的度数。 2. 连接方式:将PA0与PF9连接(PA0为定时器5产生的控制定时器14产生的脉冲个数,通过高电平捕获的方式) PF9驱动器的脉冲 3. 程序:见源代码/2.步进电机(Stepper motor 1., realize the function: control the motor to turn t
步进电机驱动器 - TIM1
- 使用STM32控制步进电机以500HZ的频率正转,反转,回原点等功能(STM32 is used to control stepper motor's functions such as forward, reverse and return to the origin at 500HZ frequency)