搜索资源列表
模拟IIC
- 使用LPT口，模拟IIC，界面友好，使用方便，不失为一个硬件调试的好帮手！ 亦可透过IIC实现双机互连，因为IIC支持主从模式:-)
STM32 模拟 IIC 驱动 Maxim 加速度传感器 MXC6202 代码
- 工程文件为编译环境 Keil MDK4 ST2.0的库,iic_driver.c是模拟IIC代码文件并读出加速度计在X，Y轴上的初始值，没有经过数据处理成加速度的值。 led.c数码管显示程序文件，注释之后的代码是通过一个数码管依次显示X，Y轴上总共8位初始值，把注释去掉之后是通过595锁存8的数码管同时显示加速度计初始值。 main.c是主函数.
windows-IIc
- 使用LPT口，模拟IIC，界面友好，使用方便，不失为一个硬件调试的好帮手！ 亦可透过IIC实现双机互连，因为IIC支持主从模式:-)-LPT I used to simulate IIC, friendly interface and ease of use, hardware debugging is a good helper! Through dual-IIC interconnection, as IIC support f
iic设计
- 这是关于MCS51的模拟IIC总线程序,很不错,大家下下看-This is the simulation of MCS51 IIC bus procedure quite well, and we look at where we
MX10MCU
- 8051模拟IIC总线读写24CXX原程序。-8051 IIC bus simulation literacy 2 PROM original program.
IIC-program
- 430IO模拟IIC的驱动程序, 大家可以下来看看呀-430IO simulation of the driver, we can look down ah
v37
- 软件 模拟IIC总线读写数据，并且支持温度、距离、模拟量的读写，仿真硬件时序-IIC bus simulation software to read and write data, and support temperature, distance, literacy analog simulation hardware Sequencers
BC-I2C
- 并口的EPP模式模拟IIC接口，可以用两线或者三线IIC，很好用的哦-EPP parallel port IIC interface simulation model that can be used two or three lines line IIC, oh, the good
iic
- 51的GPIO模拟iic的驱动程序，用宏来定义硬件管脚，容易移植，keil平台-51 GPIO IIC driver simulation, using macros to define the hardware pin, easy to transplant, keil platform
Gpio_i2c
- 基于RMI1250（MIPS 32内核）通过GPIO模拟IIC驱动源码，在WinCE 5.0下测试通过-Based on RMI1250 (MIPS 32 core) through the GPIO analog source IIC driver in WinCE 5.0 under the test
IIC-C51
- 单片机模拟IIC总线程序包-IIC-bus single-chip simulation package
IIC
- 基于80c51的模拟IIC时序，采用C语言编写，可以写入数据，也可读出数据-80C51-based simulation IIC timing, the use of C language, you can write data, but also读出数据
IIC
- MSP430模拟iic总线，驱动ZLG7290程序-MSP430 analog iic bus, the driver ZLG7290 program
iic
- 软件模拟IIC的接口程序,此程序用C语言编写而成-IIC interface software simulation program, this program made with C language
基于stm32的MPU6050收读取和模拟IIC
- 基于stm32的MPU6050收读取和模拟IIC 陀螺仪初始化配置，陀螺仪三轴加速度算法处理，俯仰角，航向角等四轴飞行器参数读取与显示。(MPU6050 receive, read, and simulate IIC based on stm32 Gyroscope initialization configuration, gyroscope three axis acceleration algorithm, pitch ang
STM32 IO口模拟IIC接口程序
- 本程序基于stm32单片机 的io口模拟IIC,STM32单片机硬件复杂且不好用，使用本程序简洁明了。(This procedure is based on the STM32 microcontroller IO port analog IIC, STM32 microcontroller hardware complex and difficult to use, the use of this program is simple
IIC
- MCU：R5F10268 编译环境：Cs+ 软件模拟IIC通讯，应用程序与驱动程序分开，可以移植到其他单片机上。已经测试验证过。(MCU: R5F10268 compile environment: Cs + Software simulation of IIC communication, application and the driver separately, can be transplanted to other
mpu6050-模拟iic
- 基于STM32的，用模拟IIC通信，来读取MPU6050的数据。(Based on STM32, the data of the MPU6050 is read by using the analog IIC communication.)
stm32103模拟0.96寸OLED驱动
- 使用stm32模拟IIC功能解决部分由于硬件问题无法驱动OLED的问题(Using STM32 to simulate the IIC function to solve the problem that the part of the OLED cannot be driven because of the hardware problem)
单片机普通IO口模拟IIC多机通信-本人已测试通过
- 关于iic通讯，主从机iic通信，可双向通信，模拟iic(Analog IIC dual computer communication)