搜索资源列表
Silicon_Controlled
- 可控硅及其触发系统的文章具有一定的参考价值
Silicon_Controlled
- 可控硅及其触发系统的文章具有一定的参考价值-SCR and its trigger system of the article has a certain reference value
SCR
- STC12C5412AD做的温度检测控制的源程序.有AD检测,可控硅过零触发,PID算法.-STC12C5412AD make the temperature measurement and control of the source. Have AD detection, zero crossing triac trigger, PID algorithm.
temperature
- STC12C5412AD做的温度检测控制的原理图.有AD检测,可控硅过零触发,开关电源.-Detect STC12C5412AD make the temperature control schematic. Have AD detection, zero crossing triac trigger, switching power supply.
YTR_YCR
- 可控硅触发特性测试代码，测试可控硅的触发电压触发电流-Characteristics of SCR trigger test code
1
- 在电压过零点触发或截至可控硅的导通或闭合；有效通断电压；应用稳定可靠；-Triggering voltage zero-crossing point or at the turn-on SCR or closed the effective on-off voltage application of stable and reliable
123456
- 本设计的主要内容是用单片机系统进行温度实时采集与控制。温度信号由AD590K和温度／电压转换电路提供，对AD590K进行了精度优于正负0.1°C的非线性补偿，温度实时控制采用分段非线性和积分分离PI算法，其分段点是设定温度的函数。控制输出来用脉冲移相触发可控硅来调节加热丝有效功率。系统具备较高的测量精度和控制精度-The main content of this design is to use real-time microcontr
gsfsq
- 一种电机调速控制方法，单片机：P89LPC9401.包括主要是对可控硅移相触发，程序主要包括利用P89LPC9401的FLASH,作数据存储器用的读写（不多见的思路）可控硅的移相触发程序。以及PCF8576笔画液晶屏的驱动程序-A motor speed control method, MCU: P89LPC9401. Including key is to trigger the SCR phase-shift, the progra
CONTROL
- 可控硅触发3X1500W三路同步多功能（新花样）LED控制器-SCR trigger 3X1500W three simultaneous multi-function (new tricks) LED controller
STC12C5052AD
- 基于Keil C51的晶体管测试仪（改为其他型号的单片机很容易，关键是STC12C5052AD比较便宜），里面的特征测试要用到AD转换，功能：基本晶体管引脚识别，hFE，二极管引脚识别，PN及NP压降，单向可控硅引脚识别，触发电压及维持偏压测试。-Based on Keil C51 transistor tester (to other types of microcontrollers is easy, the key is STC1
water-temperature-control-system
- 该系统以AT89C51单片机为核心实现温度控制。温度信号由AD590和温度/电压转换电路获得，温度实时控制采用PID算法，控制输出采用PWM波触发可控硅来控制加热通断。使系统具有较高的测量精度和控制精度。-The system AT89C51 microcontroller as the core temperature control. Temperature signal obtained by the AD590 and temp
stc12c2052
- 对输出电压进行AD采样，然后与参考电压进行比较，对可控硅触发时间进行调节，从而控制输出电压之间用PID算法进行调节，可以稳定输出一定的电压值。-Sampling the output voltage AD, and then compared with a reference voltage, the SCR trigger time adjusted so as to control the output voltages betwe
osr_pwm_demo
- 可控硅调功率驱动程序,采用检测过零信号(50HZ,即20ms一个周期)来触发可控硅,例如:过零信号后马上触发,那么输出100 ,过零信号后延时5ms,那么输出50 .-Thyristor power driver using zero-crossing detection signal (50HZ, ie 20ms cycle) to trigger the SCR, for example: immediately after the
sdcf
- 通过2个按键设置可控硅的触发角，达到调整电压的功能，同时按下2个按键有开关功能-Through two buttons set thyristor firing angle, to adjust the voltage function, simultaneously press two buttons with switch function
oila
- 数控机床定时加油程序，采用STC12C5204单片机，触发可控硅，驱动油泵电机工作。-CNC machine regular refueling procedures, using STC12C5204 microcontroller, triggered thyristor drive pump motor work.
MCU-synchronous-triggering-thyristor
- STC12C5A60S2-PCA-同步触发可控硅-STC12C5A60S2-PCA- synchronous triggering thyristor
DHJ_QK
- 气动电焊机主控制程序，具有气缸控制，可控硅移相触发控制功能，实现电焊机的自动碰焊功能-Pneumatic welding machine main control program, with cylinder control, SCR phase trigger control functions, to achieve automatic welding machine Welding function
project
- 如果是用单向可控硅驱动负载, 软件方面在触发可控硅的时候提前过零打开 可控硅.-If you are using a one-way thyristor drive the load, the software side ahead when triggered thyristor zero crossing open SCR.
可控硅触发回路
- 原理图用于各种可控硅触发回路，采用脉冲变压器实现触发更快更稳。(The schematic diagram is used for various SCR triggering circuits, and the pulse transformer is adopted to trigger more quickly and steadily.)
STC12C5A60S2-PCA-同步触发可控硅
- STC12C5A60S使用PCA出发可控硅程序(STC12C5A60S uses PCA to start a silicon controlled program)