搜索资源列表
SPWM
- DSP编程，SPWM驱动程序。用以驱动三相PWM输出-DSP programming, SPWM driver. Three-phase PWM output to drive
STM8_Sinwave
- 使用STM8的定时器产生SVPWM，输出三相正玄波，只有基本功能，在实际硬件中验证过-generated SVPWM using STM8 s Timer, the output 3-phase wave, only basic functionality, proven in real hardware
SPWM
- 用STC12C5608AD产生三相正弦波调制信号，同时提供数模转换电压输出-Generate three-phase sine-wave modulation signal, while providing the digital to analog converter voltage output with STC12C5608AD
SPWM
- 基于2812的三相全桥的SPWM逆变器程序，开环 设计，输出50Hz正弦波，调制比0.8，调制频率6150HZ-2812 three-phase full-bridge SPWM Inverter-based program, the open-loop design, the output 50Hz sine wave modulation ratio of 0.8, the modulation frequency 6150HZ
inverter_10kw_SPWM
- 10kw2808三相SPWM，已调试,可以输出三相对称SPWM波形-#include "DSP280x_Device.h" // DSP280x Headerfile Include File #include "DSP280x_Examples.h" // DSP280x Examples Include File #include "math.h" #include "IQmathLib.h" // Pr
spwm
- 在PSCAD中采用fortran语言实现SPWM的开关表选择器，能够正确输出三相电压型逆变器的开关表。-Using fortran language PSCAD achieve SPWM switching table selector can be correctly output three-phase voltage-source inverter switching table.
spwm
- 利用Matlab软件中Simulink和Power System为一个三相电压源SPWM逆变器建立系统仿真模型,并对其输出特性进行仿真分析。 它的主要功能是将直流电压变换成交流电压,采用SPWM控制策略,实时地调节逆变输出电压的幅值,以满足实际的要求。系统的主回路选用IGBT作为开关器件,为了减少输出电压的谐波,逆变电源输出接有串联谐振滤波电路。 -simulation of a spwm Inverte
lab21-HRPWM
- 28335的spwm输出，开环测试，三相spwm信号分别为epwm1~6，频率为20KHz-spwm output 28335, the open-loop test, three-phase spwm signals are epwm1 ~ 6, frequency 20KHz
VSR
- 三相大功率整流器软件的算法，直流侧输出电压为800伏特(The algorithm of three-phase high power rectifier software, the DC side output voltage is 800 Volts)
EG8030-datasheet
- EG8030 三相SPWM 逆变器专用芯片 EG8030 是一款数字化的、功能完善的自带死区控制的三相纯正弦波逆变发生器芯片，可配置的四种工 作模式可应用于DC-DC-AC 两级功率变换架构或DC-AC 单级工频变压器升压变换架构。外接16MHz 晶体振荡 器，能产生高精度、失真和谐波都很小的三相SPWM 信号。并具备完善的采样机构，能够采集电流信号、温 度信号、三相电压信号，实施处理，实现输出稳压和各项保护功能。芯片采用CMOS 工
6路 SPWM输出实验(修改)
- 该程序可用于三相全桥逆变器驱动，或驱动三相电机(Six way SPWM output)
3相SPWM
- 三相spwm输出，有六路输出，其中每两路波形互补，可用于驱动ir2110，mos管(The three-phase SPWM output has six outputs, each of which is complementary to each other and can be used to drive the IR2110 and MOS tubes)
spwm
- 空间矢量控制 三相有源逆变/整流 输出波形还可以(svpwm control output is very good)
SPWM自己写的
- 本例程为基于STM32F103的带互补输出和死区的三相SPWM信号输出，(This routine is based on the STM32F103, with complementary output and dead band three-phase SPWM signal output,)
3相SPWM
- 输出3相spwm波形，可驱动三相桥，包含完整工程及源码(3 phase SPWM output waveform, can drive three-phase bridge)
King_SPWM（单极性）
- 这是一个基于STM32的SPWM程序,可改变输出频率，是单极性SPWM,以及可改编成三相SPWM(This is a SPWM program based on STM32, which can change output frequency. It is unipolar SPWM, and can be adapted to three-phase SPWM.)
STM32SPWM实现
- 用STM32F103 实现三相互补输出 SPWM波，可调频率，串口通许控制，已经上机调试成功(Using STM32F103 to realize three phase complementary output SPWM wave, adjustable frequency and serial port control, it has been debugged successfully.)
3相SPWM
- 输出spwm信号，用于直流变交流逆变的信号(spwm signal Output SPWM signal for DC/AC Inverters)
power_3level
- 该模型是对50kW、380V、50Hz三相三电平逆变器的两个相同电路进行建模。IGBT逆变器采用SPWM技术，(8kHz载频)将直流电源从a +/-200Vdc源转换为220V AC, 50Hz。逆变器通过75kVA 220/380V变压器输入50kW电阻负载。变频器输出采用L-C滤波器滤除主要产生于8kHz开关频率倍数(Fh=n*8000 +/-k*50Hz)附近的谐波频率Fh。逆变器所需的12个逆变脉冲由PWM发生器块产生。该系统以
三路三相SPWM波
- 基于Tm4C123G的三相SPWM，能够实现DC_AC的变换 可结合现在流行的微电网和泛在电力物联网技术(Three-phase SPWM based on Tm4C123G can realize DC_AC transformation. It can be combined with the popular microgrid and ubiquitous power Internet of things technology.