资源列表

« 1 2 ... .21 .22 .23 .24 .25 2226.27 .28 .29 .30 .31 ... 2656 »

[其他嵌入式/单片机内容adc

说明:基于s3c2440开发板裸机程序ad转换程序代码-S3c2440 development board based on bare metal ad conversion program code
<无图画> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容qianrushichengxu

说明:该程序是基于w90p710的嵌入式系统的程序,可实现密码锁的功能-The program is based on the w90p710 embedded system procedures, can lock function
<gaoxue> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容Lcd.c

说明:program to drive a 20X4 or 16X2 lcd. depending on the macro you define .
<Tanmay> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容SIGMA_DELTA

说明:Code of Sigma Delta in MSP430. Simple code for Multiple bytes Transfer. Part of Sample Program
<can> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容Sharp_3DTV_HDMI_EDID

说明:夏普 3D TV HDMI EDID 码-SHARP 3D TV HDMI edid code, for reference.
<wang> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容newcsj

说明:PLC开发自动灌溉系统,如有问题,请联系我。-Development of automatic irrigation system PLC
<Jimmy> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容NRF2401

说明:nRF24l01程序,包括初始化设置、寄存器配置、读写控制等-nRF24l01 procedures, including initial setup, configuration registers, read and write control
<John> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容led_blinky11

说明:led blinking program used to blink leds c8051f340
<shiv> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容I2C

说明:GPIO 模拟I2C, 稳定可靠的接口函数-GPIO emulate I2C interface
<李海力> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容msp430-chushihua

说明:对于msp430f449各部分外设的初始化程序,需用到外设的程序都要进行这样的初始化。-Peripheral parts of the msp430f449 initialization procedure, the procedure should be required to conduct such peripheral initialization.
<王令> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容JP6284

说明:he Display is an array of 5x24 Leds. I used Shift registers to light up every column, DO NOT USE ANY 74LSXXX TTL. The 74LS is a Low Power TTL that doesn t light up the leds very well. Use the 74HCXXX series or 74FXX seri
<pastora26> 在 2025-02-02 上传 | 大小:3kb | 下载:0

[其他嵌入式/单片机内容CRC

说明:在使用终端设备采集数据的时候,使用串口传回并进行CRC校验,此为CRC校验代码-Data collection in the use of terminal equipment, when returned using the serial port and the CRC, the CRC check code is
<xby841221> 在 2025-02-02 上传 | 大小:3kb | 下载:0
« 1 2 ... .21 .22 .23 .24 .25 2226.27 .28 .29 .30 .31 ... 2656 »

源码中国 www.ymcn.org