资源列表

« 1 2 ... 91 92 93 94 95 9697 98 99 100 .01 ... 2139 »

[DSP编程DSP2812-classic-example

说明:压缩包中有关于DSP2812系列的经典例程,适合初学者学习-DSP2812 classic example
<许文运> 在 2024-09-29 上传 | 大小:16638976 | 下载:0

[DSP编程28335_ADC_dma

说明:TI的 DSP28335 多通道ADC采样程序,DMA模式完整的例程程序。使用CCS编译。-TI DSP28335 multi-channel ADC sampling procedures, DMA mode complete routines procedures. Compile with CCS.
<乐宏林> 在 2024-09-29 上传 | 大小:448512 | 下载:0

[DSP编程v170

说明:TMS320F2808官方例程源码, doc DSP280x_common DSP280x_examples DSP280x_examples_ccsv4 DSP280x_headers -TMS320F2808 official example source code doc DSP280x_common DSP280x_examples DSP280x_examples_ccsv4 DSP
<卢晓健> 在 2024-09-29 上传 | 大小:1731584 | 下载:0

[DSP编程560

说明:seed xds-560驱动 可以适应CCS5-560 driver
<reezor> 在 2024-09-29 上传 | 大小:5235712 | 下载:0

[DSP编程electric-vehicle

说明:电动车控制程序,基于PIC单片机,内部有具体流程及方法-Electric vehicle control procedures, based on PIC microcontroller, there are specific processes and methods
<> 在 2024-09-29 上传 | 大小:865280 | 下载:0

[DSP编程dsp28335_CODE

说明:dsp学习例程很好的例程 适合初学者,望斟酌下载-code of dsp code of dsp code of dsp code of dsp code of dsp code of dsp
<卞帅> 在 2024-09-29 上传 | 大小:23363584 | 下载:0

[DSP编程gpio_setup

说明:配置dsp2802x GPIO成两个不同的配置,这段代码详细说明如何设置的.-This code is verbose to illustrate how the GPIO could be setup.
<刘虎> 在 2024-09-29 上传 | 大小:6144 | 下载:0

[DSP编程timed_led_blink

说明:这个示例配置CPU Timer0 以500毫秒为周期以及触发GPIO3、4-This example configures CPU Timer0 for a 500 msec period, and toggles the GPIO34
<刘虎> 在 2024-09-29 上传 | 大小:5120 | 下载:0

[DSP编程i2c_eeprom

说明:dsp28027,通过i2c在eeprom写入1~4个字节,再从中读出。-This program will write 1-14 words to EEPROM and read them back.
<刘虎> 在 2024-09-29 上传 | 大小:8192 | 下载:0

[DSP编程cpu_timer

说明:这个示例配置DSP28027CPU Timer0 1 & 2和增量,每计数一次,定时器产生一个中断。-This example configures CPU Timer0, 1, & 2 and increments,a counter each time the timer asserts an interrupt.
<刘虎> 在 2024-09-29 上传 | 大小:53248 | 下载:0

[DSP编程adc_temp_sensor

说明:配置dsp28027的PLL为x12/2模式。这个是其具体的程序实现。- This example sets up the PLL in x12/2 mode.
<刘虎> 在 2024-09-29 上传 | 大小:6144 | 下载:0

[DSP编程ecap_capture_pwm

说明:在ccs5.5环境下,捕获pwm,可选择上升沿与下降沿,目的:获取一定时间-In the ccs5.5 environment, capture PWM, you can choose the rising edge and the falling edge, the purpose: to obtain a certain time
<欧阳元清> 在 2024-09-29 上传 | 大小:66560 | 下载:0
« 1 2 ... 91 92 93 94 95 9697 98 99 100 .01 ... 2139 »

源码中国 www.ymcn.org