资源列表

« 1 2 ... .11 .12 .13 .14 .15 216.17 .18 .19 .20 .21 ... 2139 »

[DSP编程CANBus-echo-V7.x

说明:DSP56F807的CAN通讯程序,可用于多子板互连、也可作为开发的原型程序-DSP56F807 CAN communication procedures can be used for many sons and Backplane, can also be used as the prototype development process
<hua> 在 2024-10-01 上传 | 大小:156672 | 下载:0

[DSP编程DSPccs5000

说明:DSP中利用ccs5000编程 包括sinx计算FIR滤波正弦波发生器等-DSP programming including the use of ccs5000 sinx calculated FIR filter sine wave generator, etc.
<张凯> 在 2024-10-01 上传 | 大小:4096 | 下载:0

[DSP编程TMS2812-learn

说明:用于开发TI的TMS320F2812FSP的学习用 开发环境为CCS2.2-used in the development of TI's TMS320F2812FSP learn from the development environment for DSP
<> 在 2024-10-01 上传 | 大小:1058816 | 下载:0

[DSP编程dsp28x

说明:TI DSP TMS320F2812的外设例程。 已经写好的模板,通过修改就可以达到我们的要求-TI DSP TMS320F2812 peripherals routines. The template has been prepared, through the revision will be to meet our requirements
<肖武> 在 2024-10-01 上传 | 大小:454656 | 下载:0

[DSP编程24xTESTProgram

说明:tm320lf2407测试程序, da-tm320lf2407 test procedures, test procedures tm320lf2407, da
<m> 在 2024-10-01 上传 | 大小:32768 | 下载:0

[DSP编程dspio

说明:tms2407 dsp io控制程序。学习dsp的一个入门程序-tms2407 dsp io control procedures. Dsp in a learning portal procedures
<m> 在 2024-10-01 上传 | 大小:41984 | 下载:0

[DSP编程xdais_5_00

说明:TI Algorithm Soft Kit 5.0d 仅包括实例及其原代码,可用于ccs2.20.18以及Studio3.1上使用。-TI Algorithm 5.0d Soft Kit includes only the original code and examples, ccs2.20.18 and can be used Studio3.1 use.
<周国华> 在 2024-10-01 上传 | 大小:3147776 | 下载:0

[DSP编程xdais_5_10

说明:TI Algorithm Soft Kit 5.10 仅包括实例及其原代码,可用于ccs2.20.18以及Studio3.1上使用。-TI Algorithm 5.10 Soft Kit includes only the original code and examples, ccs2.20.18 and can be used Studio3.1 use.
<周国华> 在 2024-10-01 上传 | 大小:4582400 | 下载:0

[DSP编程IO_OUTPUT_8LED

说明:利用DSP I/O口点亮8个LED的程序-use DSP I/O Hau eight LED lights procedures
<王超> 在 2024-10-01 上传 | 大小:1024 | 下载:0

[DSP编程EV_TIME1_1MS

说明:利用DSP EV模块实现1ms延时程序,需根据具体使用时钟频率 -use DSP Module 1ms delay procedures required under the specific use of the clock frequency
<王超> 在 2024-10-01 上传 | 大小:1024 | 下载:0

[DSP编程ADC_SAMPLE

说明:ADC模块实现模数转换,从采样接口输入模拟信号-ADC module analog-to-digital conversion, sampling the analog signal input interface
<王超> 在 2024-10-01 上传 | 大小:1024 | 下载:0

[DSP编程SPI_OUT_TRIGONALWAVE

说明:三角波发生程序,须使用SPI接口及一个D/A转换器-triangular wave occurred procedures, require the use of SPI interface and a D/A converter
<王超> 在 2024-10-01 上传 | 大小:1024 | 下载:0
« 1 2 ... .11 .12 .13 .14 .15 216.17 .18 .19 .20 .21 ... 2139 »

源码中国 www.ymcn.org