资源列表

« 1 2 ... .18 .19 .20 .21 .22 523.24 .25 .26 .27 .28 ... 697 »

[uCOS开发ucosvc

说明:
<fontlosee> 在 2009-02-12 上传 | 大小:101259 | 下载:0

[uCOS开发ARM_exp_AT91ucos

说明:在ATEML公司EB40/40a/42/63/55开发板上运行的uCOS-II v2.0。-in ATEML company EB40/40a/42/63/55 development board running for uCOS- II v2.0.
<zhouhouqiu> 在 2024-10-21 上传 | 大小:100352 | 下载:0

[uCOS开发UCOII_YIZHIXINDE

说明:UCOS-II移植心得,对于移植操作系统的工程师有帮助-UCOS-II transplantation experience for Portable Operating System engineers have to help
<beyond> 在 2024-10-21 上传 | 大小:100352 | 下载:0

[uCOS开发Test_LCD_MOTOR

说明:此代码是我精心调试而成,内有NOKIA3310驱动,无刷电机驱动,还有UCOS嵌入式操作系统,在电路板上调试成功-This code is from my well-debug, which have NOKIA3310 driver, brushless motor drive, there are uCOS embedded operating system, the success of the circuit board deb
<zhujianzhong> 在 2024-10-21 上传 | 大小:100352 | 下载:0

[uCOS开发uCOS

说明:μC/OS-Ⅱ在ARM处理器上的移植,包含简单的源码分析-μC/OS- Ⅱ in the ARM processor on the transplant, the source contains a simple analysis
<songshi> 在 2024-10-21 上传 | 大小:101376 | 下载:0

[uCOS开发uCOSII_ATmega128

说明:uCOS-II 在AVR单片机ATMEGA128上的移植版本,非常不错哦!-uCOS-II single-chip in the AVR' s transplant ATMEGA128 version, very good, oh!
<chenwei> 在 2024-10-21 上传 | 大小:101376 | 下载:0

[uCOS开发os_uart

说明:ARM9板子 ucos的下串口uart驱动代码-ucos uart
<Jay Yao> 在 2024-10-21 上传 | 大小:101376 | 下载:0

[uCOS开发GUI.TEST.Data.Embedded

说明:GUI TEST Data嵌入式开发代码GUI TEST Data Embedded Development Code -GUI TEST Data Embedded Development Code
<auy> 在 2024-10-21 上传 | 大小:101376 | 下载:0

[uCOS开发Exp6LCD

说明:LCD驱动实验,主要用于LCD的简单控制,显示图像等-LCD driver test, the LCD is mainly used for simple control, display images, etc.
<mochen> 在 2024-10-21 上传 | 大小:100352 | 下载:0

[uCOS开发CFCard

说明:SmartARM2400开发平台 基于uc/osii的示例程序,记住要在uCOSII文件夹下面加入UC/OS 2.52源码,这个包里面没有加入UC/OS源码,但经过运行测试,绝对能用,完全可以用于产品,稳定性不错。这个包是操作CF卡的示例,需要的可以下来学习下-based on smartArm2478 ,use uc/os,CF Card test
<ybno4> 在 2024-10-21 上传 | 大小:100352 | 下载:0

[uCOS开发FATFSAnd-NandflashDriver

说明:NADN FLASH 上建立fatfs ,基于ucos-base on nandflash and ucosII to establish fatfs
<gerry> 在 2024-10-21 上传 | 大小:101376 | 下载:0

[uCOS开发ZLG_UART_UCOS

说明:周立功的在UCOS下的串口编程,建议大家好好学习一下,会受益匪浅的-serial port program
<> 在 2024-10-21 上传 | 大小:101376 | 下载:0
« 1 2 ... .18 .19 .20 .21 .22 523.24 .25 .26 .27 .28 ... 697 »

源码中国 www.ymcn.org