资源列表
[嵌入式Linux] ARM_LCD12232
说明:基于12232ARM驱动程序源码,自己写的已经调通,做项目写的-Based on 12232ARM driver source code, has been transferred through their writing, a project to write<周桂成> 在 2025-02-01 上传 | 大小:109kb | 下载:0
[嵌入式Linux] easy-bootloader
说明:使用ads1.2作为开发工具实现了tq2440的bootloader的command命令行功能和下载功能(仅串口字符下载)。-Use ads1.2 as a development tool to achieve tq2440 of the bootloader command command-line features and download (only download serial characters).<刘可兴> 在 2025-02-01 上传 | 大小:2.88mb | 下载:0
[嵌入式Linux] iis_uda1341
说明:一个IIS的音频实验。可以在S3C44B0的开发板上测试。自己改动一下后也可以在S3C2440上用-One of IIS audio experiment. The development board can be tested in S3C44B0. Look after their own changes on the S3C2440 can use<冯柯> 在 2025-02-01 上传 | 大小:146kb | 下载:0
[嵌入式Linux] stream_data
说明:以太网控制LInux系统下驱动程序,文件名stream_data.c-Ethernet control system LInux driver<sll> 在 2025-02-01 上传 | 大小:2kb | 下载:0
[嵌入式Linux] iBoot_v0.0.1_110531
说明:iboot 一个开源的bootloader-iboot an open source bootloader<Daidai> 在 2025-02-01 上传 | 大小:2.8mb | 下载:0
[嵌入式Linux] xitongdiaoyong
说明:1:修改dev.c文件,定义一个全局变量int count=0 然后用它来统计包的个数。 2.修改sys.C文件,添加extern int count 然后定义自己的函数,asmlinkage int sys_mycall(void) 3.修改entry.S和unistd.h文件,为自己定义的函数增加系统调用号。 4.自己写个函数进行系统调用。-1: Modify dev.c file, define a global va<吴涛> 在 2025-02-01 上传 | 大小:56kb | 下载:0
[嵌入式Linux] linux_transplantation
说明:《S3C44B0开发板移植内核2.6 uclinux记录》以及一篇论文《基于Linux的USB 2.0 OTG IP核主机驱动的研究与实现》。-" S3C44B0 development board transplantation kernel 2.6 uclinux record" and a paper " Linux-based USB 2.0 OTG IP core host-driven resear<zz> 在 2025-02-01 上传 | 大小:5.19mb | 下载:0
[嵌入式Linux] uboot_nand
说明:u-boot移植到s3c2440时,对nand flash的支持文件-u-boot porting to s3c2440, the supporting documents on the nand flash<晁衍凯> 在 2025-02-01 上传 | 大小:65kb | 下载:0