资源列表

« 1 2 ... .90 .91 .92 .93 .94 1295.96 .97 .98 .99 .00 ... 2741 »

[微处理器(ARM/PowerPC等)bootloadertest

说明:基于sep3203的bootloader,出了实现bootloader基本功能外,还可以实现对flash的写操作。-Based sep3203 the bootloader, the bootloader to achieve the basic function, but also can write to the flash.
<phoenixgu123> 在 2025-02-08 上传 | 大小:335kb | 下载:0

[微处理器(ARM/PowerPC等)Mega16-SPI

说明:基于ATMega16的硬件SPI驱动代码,调试通过的-Hardware-based ATMega16 SPI driver code, debugging through the
<huangyong> 在 2025-02-08 上传 | 大小:16kb | 下载:0

[微处理器(ARM/PowerPC等)MEGA16-IIC-LED

说明:基于ATMEGA16的硬件I2C驱动代码,调试通过-ATMEGA16 hardware-based I2C driver code, debugging through
<huangyong> 在 2025-02-08 上传 | 大小:20kb | 下载:0

[微处理器(ARM/PowerPC等)MEGA16-LCD12864

说明:基于MEGA16的12864液晶驱动代码,已调试通过-The 12864-based LCD driver code MEGA16 has been debugged
<huangyong> 在 2025-02-08 上传 | 大小:47kb | 下载:0

[微处理器(ARM/PowerPC等)ADE7758

说明:基于MEGA16的硬件驱动ADE7758的代码,已调试通过-ADE7758 MEGA16 hardware drivers based on the code has been debugged
<huangyong> 在 2025-02-08 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)I2C

说明:基于MEGA16的硬件I2C驱动读写24C02的代码,已调试通过,可直接使用-Hardware-based I2C driver MEGA16 24C02 code to read and write, has been debugged, can be used directly
<huangyong> 在 2025-02-08 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)dis_ascii

说明:msp430f149编程软件关于ASCII显示-msp430f149 programming software on the ASCII display
<嵇大荣> 在 2025-02-08 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)fet440_uart01_09600

说明:msp449的演示程序代码关于串口通讯测试-msp449 demonstration test program code on the serial communication
<嵇大荣> 在 2025-02-08 上传 | 大小:1kb | 下载:0

[微处理器(ARM/PowerPC等)ethtest2

说明:ENC28J60以太网控制芯片在STM32开发板上的应用-ENC28J60 Ethernet controller chip applications in the STM32 development board
<wsm> 在 2025-02-08 上传 | 大小:658kb | 下载:0

[微处理器(ARM/PowerPC等)CAN(Normal)

说明:STM32处理器上的CAN总线通信(正常模式)-STM32 processors CAN bus communication (normal mode)
<wsm> 在 2025-02-08 上传 | 大小:424kb | 下载:0

[微处理器(ARM/PowerPC等)CAN(LoopBack)

说明:STM32处理器上的CAN总线通信代码(回环模式)-STM32 CAN bus communication on the processor code (loop mode)
<wsm> 在 2025-02-08 上传 | 大小:416kb | 下载:0

[微处理器(ARM/PowerPC等)DS18B20

说明:基于DS18B20的点对点温度采集程序,温度采集范围在-20~125C。-Point to point on DS18B20 temperature acquisition procedures temperature measurement range of-20 ~ 125C.
<叶润> 在 2025-02-08 上传 | 大小:507kb | 下载:0
« 1 2 ... .90 .91 .92 .93 .94 1295.96 .97 .98 .99 .00 ... 2741 »

源码中国 www.ymcn.org