资源列表

« 1 2 ... .51 .52 .53 .54 .55 33856.57 .58 .59 .60 .61 ... 33934 »

[微处理器(ARM/PowerPC等)FreeRTOSFatFS

说明:实现FatFS文件系统在FreeRTOS操作系统上的移植并运行。硬件平台在STM32的红牛开发板实现,可以完成SD卡上文件的读取,查找,删除,文件属性修改等等操作。-Achieve FatFS file system FreeRTOS operating system migration and run it. Hardware platform for Red Bull in the STM32 development board t
<汪汪> 在 2024-09-20 上传 | 大小:1420288 | 下载:2

[微处理器(ARM/PowerPC等)430f149_com-V0.02

说明:msp430串口程序,可以实现和PC机以及其他处理器的串口通信。-MSP430 program
<caohuanqf> 在 2024-09-20 上传 | 大小:3072 | 下载:2

[单片机(51,AVR,MSP430等)hua

说明:完整的激光灯控制程序。此程序可直接在激光灯主板直接使用。-lasta aaaaaaaaaaaaa
<hwyfy> 在 2024-09-20 上传 | 大小:11264 | 下载:2

[单片机(51,AVR,MSP430等)MSP430F149

说明:这是我画的MSP430F149单片机原理图和PCB图-This is my painting of the MSP430F149 microcontroller schematic and PCB diagram
<凌同飞> 在 2024-09-20 上传 | 大小:176128 | 下载:2

[微处理器(ARM/PowerPC等)1.ucos

说明:1.ucos移植代码 在blankfind 518-1.ucos portable code 1.ucos portable code blankfind 518
<韩坤> 在 2024-09-20 上传 | 大小:1132544 | 下载:2

[单片机(51,AVR,MSP430等)5218b20

说明:stc89c52单片机实例,18b20(数码管显示),可以对学习单片机的朋友做一个参考。-stc89c52 SCM instance, 18b20 (digital tube display), you can learn from a friend to make a reference MCU.
<王皓> 在 2024-09-20 上传 | 大小:17408 | 下载:2

[uCOS开发Micrium-ucTCPIP

说明:关于ucos2的TCPIP协议栈,内含协议栈详细说明,和ucosV2.86源代码,及NIC驱动等,是学习ucos2和TCPIP协议的宝贵资料!-About ucos2 the TCPIP protocol stack, containing detailed descr iption of the protocol stack, and ucosV2.86 source code, and the NIC drivers, etc. a
<zhonghai> 在 2024-09-20 上传 | 大小:2463744 | 下载:2

[VHDL编程endat_c

说明:用于读取海德汉绝对位置编码器的位置数据。ENDAT2.1接口-Read the data from ENDAT2.1
<伊文> 在 2024-09-20 上传 | 大小:1024 | 下载:2

[VHDL编程AHBtoAPB

说明:amba总线桥:ahb to asb!verilog hdl文档加代码,非常全,soc-amba bus bridge: ahb to asb! verilog hdl code for the document plus a very full, soc
<zhangyiyun> 在 2024-09-20 上传 | 大小:165888 | 下载:2

[单片机(51,AVR,MSP430等)TW8816_MAIN_REV2.1

说明:tw8816 pads logic schematic 模板
<LIBIN> 在 2024-09-20 上传 | 大小:98304 | 下载:2

[嵌入式/单片机编程Gcode

说明:对数控系统的G代码的解析程序不可多的,是研究CNC系统极好的参考资料-CNC G-code on the analytic process is not much, is an excellent reference of CNC system
<zxg> 在 2024-09-20 上传 | 大小:779264 | 下载:2

[DSP编程SEED-VPM642

说明:此程序为基于SEED-VPM642开发板的实验程序,包含了众多的实验源代码。-This program is based on the SEED-VPM642 experimental procedure development board, including many of the experimental source code.
<朱林林> 在 2024-09-20 上传 | 大小:22508544 | 下载:2
« 1 2 ... .51 .52 .53 .54 .55 33856.57 .58 .59 .60 .61 ... 33934 »

源码中国 www.ymcn.org