资源列表

« 1 2 ... .23 .24 .25 .26 .27 928.29 .30 .31 .32 .33 ... 1232 »

[驱动编程SPI

说明:6410的SPI驱动程序。测试过了。接用其他外接设备时要有必要的修改-the SPI driver of 6410,Tested。 Tested. The necessary modifications connected with other external devices
<龙环> 在 2024-09-30 上传 | 大小:12288 | 下载:0

[驱动编程USB

说明:USB的驱动,wince环境下的,MDD层没有修改,PDD根据硬件自行修改-USB drive wince environment, MDD layer not modify, PDD modify hardware
<龙环> 在 2024-09-30 上传 | 大小:7168 | 下载:0

[驱动编程SERIAL

说明:uart 驱动程序wince环境下的,MDD层没有修改,PDD根据硬件自行修改-the uart driver wince environment, MDD layer does not modify modify, PDD according to hardware
<龙环> 在 2024-09-30 上传 | 大小:22528 | 下载:0

[驱动编程IIC

说明:IIC总线驱动,wince环境下的,MDD层没有修改,PDD根据硬件自行修改-The IIC bus driver wince environment, MDD layer does not modify modify, PDD according to hardware
<龙环> 在 2024-09-30 上传 | 大小:29696 | 下载:0

[驱动编程TOUCH

说明:触摸屏 wince环境下的,MDD层没有修改,PDD根据硬件自行修改-Touch screen wince environment, MDD layer is not modified, PDD modify hardware
<龙环> 在 2024-09-30 上传 | 大小:9216 | 下载:0

[驱动编程beep

说明:友善之臂mini2440开发板ARM-linux的beep底层驱动和测试程序-Friendly arm mini2440 development board ARM-linux beep underlying driver and testing procedures
<张宝寅> 在 2024-09-30 上传 | 大小:12288 | 下载:0

[驱动编程amlogic_i2c.tar

说明:Amlogic晶晨半导体 aml8726-m3 的I2C驱动。包含GPIO模拟方式和硬件方式。-. ├── aml_i2c.c ├── aml_i2c.h ├── aml_sw_i2c.c ├── aml_sw_i2c.h ├── i2c-apollo.c ├── i2c-apollo.h ├── Kconfig ├── Makefile └── README
<dongdong> 在 2024-09-30 上传 | 大小:15360 | 下载:0

[驱动编程clock

说明:linux下块设备驱动Demo源码,实现对虚拟磁盘块设备驱动的读写操作-under linux block device Demo source, read and write operations on the virtual disk block device
<小xx> 在 2024-09-30 上传 | 大小:99328 | 下载:0

[驱动编程usb-to-serial-port-driver

说明:usb转串口驱动 xp版 win7版 vista版-usb to serial port driver xp edition win7 vista version
<loveqq7> 在 2024-09-30 上传 | 大小:5771264 | 下载:0

[驱动编程basic-unix

说明:非常详细的linux系统之基于控制终端操作指令-Basic operating instructions
<caisong> 在 2024-09-30 上传 | 大小:1024 | 下载:0

[驱动编程RenameFile

说明:网络中已经有一些实用IRP直接操作文件的例子,不过文件重命名操作有点特俗,且没例子。这里是一个内核中文件重命名的示例-Network has some examples of practical the IRP direct operating file, but the file rename operation is a bit special customs and no examples. Here is an example
<DEF> 在 2024-09-30 上传 | 大小:3072 | 下载:0

[驱动编程Keypad-interfacing

说明:使用1758读取4*4键盘读数,在电脑屏幕上显示键盘按下的按键数-interfacing with 1758 and keypad,and display the number pressed in the computer screem
<catermao> 在 2024-09-30 上传 | 大小:200704 | 下载:0
« 1 2 ... .23 .24 .25 .26 .27 928.29 .30 .31 .32 .33 ... 1232 »

源码中国 www.ymcn.org