文件名称:jiaotongdeng-FPGA
介绍说明－－下载内容均来自于网络，请自行研究使用
交通灯控制器控制两个主干道交叉路口的交通，路口车辆多，直行信号、左转弯信号分开显示，a，b两个主干道的通行时间相等，其中指示直行的绿灯亮30 s，指示左转弯的绿灯亮12 s，绿灯变至红灯时，黄灯亮3 s，以便于车辆能停在停车线内，红灯信号的最后3 s相应的黄灯也同时亮，以便提示驾驶人员准备起步。在两个主干道路口都配备传感器用来检测有无车辆通行。当两个主干道都有车辆时，自动处于主干道a绿灯，主干道b红灯的状态，然后轮流切换通行。当主干道a无车辆时，自动处于主干道b绿灯，主干道a红灯的状态；反之亦然，以提高通行效率。-Traffic light controller controls the two main roads traffic intersection, crossing vehicles, straight signal, left turn signal shown separately, the transit time a, b is equal to two main roads, which indicates straight green light 30 s, indicates that the left turn the green light 12 s, when the green light changed to red light, yellow light 3 s, so that the vehicle can be parked in the parking line, the last 3 s corresponding yellow red signal light also, in order to prompt the driver ready to start . In the two main road junctions are equipped with sensors for detecting the presence or absence of vehicular traffic. When two roads have vehicle automatically in a green trunk, trunk b red state, then turn switch traffic. When the main road without a car, in the trunk b automatic green light, a red light state roads and vice versa, in order to improve traffic efficiency.
(系统自动生成,下载前可以参看下载内容)
下载文件列表
JTD
...\CLKGEN.bsf
...\DAOLU1.vhd
...\DAOLU1.vhd.bak
...\DAOU2.vhd
...\DAOU2.vhd.bak
...\FD.vhd
...\FD.vhd.bak
...\JTD.asm.rpt
...\JTD.bdf
...\JTD.done
...\JTD.dpf
...\JTD.fit.rpt
...\JTD.fit.summary
...\JTD.flow.rpt
...\JTD.map.rpt
...\JTD.map.summary
...\JTD.pin
...\JTD.pof
...\JTD.qpf
...\JTD.qsf
...\JTD.qws
...\JTD.sof
...\JTD.tan.rpt
...\JTD.tan.summary
...\JTD_assignment_defaults.qdf
...\SW1.bsf
...\SW1.vhd
...\SW2.bsf
...\SW2.vhd
...\SW2.vhd.bak
...\YIMA1.vhd
...\YIMA1.vhd.bak
...\YIMA2.vhd
...\YIMA2.vhd.bak
...\YIMA3.vhd
...\YIMA4.vhd
...\YIMA4.vhd.bak
...\YIMA5.vhd
...\YIMA5.vhd.bak
...\daolu1.bsf
...\daolu2.bsf
...\db
...\..\JTD.db_info
...\..\JTD.eco.cdb
...\..\JTD.sld_design_entry.sci
...\..\logic_util_heursitic.dat
...\..\prev_cmp_JTD.asm.qmsg
...\..\prev_cmp_JTD.fit.qmsg
...\..\prev_cmp_JTD.map.qmsg
...\..\prev_cmp_JTD.qmsg
...\..\prev_cmp_JTD.tan.qmsg
...\fd.bsf
...\fd_10hz.bsf
...\incremental_db
...\..............\README
...\..............\compiled_partitions
...\..............\...................\JTD.root_partition.cmp.dfp
...\..............\...................\JTD.root_partition.cmp.kpt
...\..............\...................\JTD.root_partition.cmp.logdb
...\..............\...................\JTD.root_partition.map.dpi
...\..............\...................\JTD.root_partition.map.kpt
...\yima.bsf
...\yima0.bsf
...\yima1.bsf
...\yima2.bsf
...\yima3.bsf
JTD1
....\CLKGEN.bsf
....\DAOLU1.vhd
....\DAOLU1.vhd.bak
....\DAOU2.vhd
....\DAOU2.vhd.bak
....\FD.vhd
....\FD.vhd.bak
....\JTD.asm.rpt
....\JTD.bdf
....\JTD.done
....\JTD.dpf
....\JTD.fit.rpt
....\JTD.fit.summary
....\JTD.flow.rpt
....\JTD.map.rpt
....\JTD.map.summary
....\JTD.pin
....\JTD.pof
....\JTD.qpf
....\JTD.qsf
....\JTD.qws
....\JTD.sof
....\JTD.tan.rpt
....\JTD.tan.summary
....\JTD_assignment_defaults.qdf
....\SW2.bsf
....\SW2.vhd
....\SW2.vhd.bak
....\YIMA1.vhd
....\YIMA1.vhd.bak
....\YIMA2.vhd
....\YIMA2.vhd.bak